A question that is likely for Eric or Wayne, perhaps Keith (or a member with a really good memory). How long does it take a K3 to activate/deactivate Split Mode and be ready to transmit? The DXLog.net developers are fine tuning the SO2V mode and from testing it appears that a delay of 200 ms is too short, 300 ms works, but may be overkill. If the value is 200 ms or less the radio drops a few dits at 36 wpm when you first transmit after a split mode change.
What would be a good typical value that would always work?
Tnx,
Ken K6MR
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
