Gentlemen;
I've reached the second testing stage with K2 #5956 and I've found
several problems. When I do the PLL reference oscillator test, I have no
range when I attempt to check the limits; the frequency is also 350 kHz
higher than it should be. The second problem is with the VCO; it too is
in the 12 MHz range, almost like it is locked to the PLL. Can anyone
suggest a starting point for me to look for the problem.
Matthew D. Pitts
N8OHU
K2 #5956
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
