Starving" Fldigi for audio Rx

[Elecraft mailing list]

In response to my question on the Win- Fldigi Reflector that I asked regarding waterfall adjustments and the fact that I was seeing no signals on the Fldigi Scope, Dave W1HKD  responded,--- If you need those controls set to the maximum range and lowest absolute signal (or close to it) then you are probably starving Fldigi for Rx audio--
So my question  concerns Dave's comment that I am "Starving" Fldigi for audio Rx.  Do other K3/ Fldigi users when operating in PSK 31 mode see any signals on the Scope view? I have tired adjusting the Rx pot on my DK II and Windows - Sounds- Recording -Levels with no change.. in Fldigi. I am able to decode signals.What settings on the K3 affect Rx audio to Fldigi?
(Setup:Win 7 PC, micoHam DKII interface.)
73 Paulkc2nyu
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

Are you sure you have configured fldigi to use the correct sound
device? With my K3 set to CONFIG:LINE OUT = Nor 10, microHAM
interface with the RX MAIN pot at ~ 10:00, and "Line (microHAM
CODEC)" level set to 80% in the Windows Sound Control panel
(Recording Devices) - Windows 10, there is no "starvation" (clean
square waves visible) in the fldigi "scope" view.

73,

    ... Joe, W4TV


On 1/13/2016 4:02 PM, paul ecker via Elecraft wrote:

> In response to my question on the Win- Fldigi Reflector that I asked regarding waterfall adjustments and the fact that I was seeing no signals on the Fldigi Scope, Dave W1HKD  responded,--- If you need those controls set to the maximum range and lowest absolute signal (or close to it) then you are probably starving Fldigi for Rx audio--
> So my question  concerns Dave's comment that I am "Starving" Fldigi for audio Rx.  Do other K3/ Fldigi users when operating in PSK 31 mode see any signals on the Scope view? I have tired adjusting the Rx pot on my DK II and Windows - Sounds- Recording -Levels with no change.. in Fldigi. I am able to decode signals.What settings on the K3 affect Rx audio to Fldigi?
> (Setup:Win 7 PC, micoHam DKII interface.)
> 73 Paulkc2nyu
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Paul,

Set the K3 LINE OUT level at 10, and after that the entire solution is
in the levels for your computer soundcard.
Sorry, but I cannot predict the settings for your particular
computer/soundcard combination.  All I can say is that Fldigi works FB
in most instances.
Yes, Fldigi can produce both a good waterfall as well as a good text
decode if you have the settings correct.

73,
Don W3FPR

On 1/13/2016 4:02 PM, paul ecker via Elecraft wrote:
> In response to my question on the Win- Fldigi Reflector that I asked regarding waterfall adjustments and the fact that I was seeing no signals on the Fldigi Scope, Dave W1HKD  responded,--- If you need those controls set to the maximum range and lowest absolute signal (or close to it) then you are probably starving Fldigi for Rx audio--
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bob McGraw - K4TAX]

I use FLDIGI with my K3S with excellent results.  I can provide screen
shots of the set-up if and as needed.

73
Bob, K4TAX
K3S, s/n 10163

On 1/13/2016 3:02 PM, paul ecker via Elecraft wrote:

> In response to my question on the Win- Fldigi Reflector that I asked regarding waterfall adjustments and the fact that I was seeing no signals on the Fldigi Scope, Dave W1HKD  responded,--- If you need those controls set to the maximum range and lowest absolute signal (or close to it) then you are probably starving Fldigi for Rx audio--
> So my question  concerns Dave's comment that I am "Starving" Fldigi for audio Rx.  Do other K3/ Fldigi users when operating in PSK 31 mode see any signals on the Scope view? I have tired adjusting the Rx pot on my DK II and Windows - Sounds- Recording -Levels with no change.. in Fldigi. I am able to decode signals.What settings on the K3 affect Rx audio to Fldigi?
> (Setup:Win 7 PC, micoHam DKII interface.)
> 73 Paulkc2nyu
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]