Starving" Fldigi for audio Rx

[Bob McGraw - K4TAX]

>
> Be sure you have the correct audio interface selected in the FLDIGI Config menu. Devices select Port Audio and the correct values in Capture & Playback window
>
> Also set the FLDIGI Upper Signal level to -10 to -20 dB.  And set the FLDIGI Signal range to -60 to -90 dB. These are at the lower left of the waterfall display.


73
Bob K4TAX



>> On Jan 13, 2016, at 3:02 PM, paul ecker via Elecraft <[hidden email]> wrote:
>>
>> In response to my question on the Win- Fldigi Reflector that I asked regarding waterfall adjustments and the fact that I was seeing no signals on the Fldigi Scope, Dave W1HKD  responded,--- If you need those controls set to the maximum range and lowest absolute signal (or close to it) then you are probably starving Fldigi for Rx audio--
>> So my question  concerns Dave's comment that I am "Starving" Fldigi for audio Rx.  Do other K3/ Fldigi users when operating in PSK 31 mode see any signals on the Scope view? I have tired adjusting the Rx pot on my DK II and Windows - Sounds- Recording -Levels with no change.. in Fldigi. I am able to decode signals.What settings on the K3 affect Rx audio to Fldigi?
>> (Setup:Win 7 PC, micoHam DKII interface.)
>> 73 Paulkc2nyu
>>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]