Strange thing.

[Mal Speer]

I strange thing happened to my K3s this morning. Both the mic gain and
compression were set to 0. After trying to get into a net, and not being
heard, I discovered the problem. I did not touch any settings from the last
time I used the rig, which was yesterday afternoon.

Has anyone had this problem?

Mal WA2TWA

 

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bill K9YEQ]

Mal, I have after playing with macros and settings.  Just reload last good config file.  That has happened to me twice.  It is like having a computer problem and file corruption can happen.  My first time I sent in and that's an expensive lesson other than mine got a thorough exam and recalibrate.  My macros remained in tact when I did the factory supplied calibrated configuration that I saved.  I have been more religious with my backing up.  Only takes a minute.

73,
Bill
K9YEQ

-----Original Message-----
From: [hidden email] [mailto:[hidden email]] On Behalf Of Mal Speer
Sent: Sunday, January 7, 2018 1:29 PM
To: [hidden email]
Subject: [Elecraft] Strange thing.

I strange thing happened to my K3s this morning. Both the mic gain and compression were set to 0. After trying to get into a net, and not being heard, I discovered the problem. I did not touch any settings from the last time I used the rig, which was yesterday afternoon.

Has anyone had this problem?

Mal WA2TWA

 

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bob McGraw - K4TAX]

Have you been operating the K3S using CAT control from an application or
logging program?   I've found when terminating some programs or the
computer or radio, during the shut down sequence, things change.    
Otherwise, values are not as you normally use them or as you left them
the previous night.

I always first close the application, turn off the radio, turn off the
power supply, and shut down the computer.  My start up procedure is just
the  opposite.  Computer on, power supply on, radio on, open the
application.

73

Bob, K4TAX


On 1/7/2018 1:29 PM, Mal Speer wrote:

> I strange thing happened to my K3s this morning. Both the mic gain and
> compression were set to 0. After trying to get into a net, and not being
> heard, I discovered the problem. I did not touch any settings from the last
> time I used the rig, which was yesterday afternoon.
>
> Has anyone had this problem?
>
> Mal WA2TWA
>
>  
>
>  
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]