Sub-RX no signals

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Sub-RX no signals

Chuck Chandler
Well, the Sub receiver was installed this morning, filters and config
seemed to complete without problem.

However, the Sub-RX does not seem to be getting any signals.  I see the
Ant=Main when I use B-Set, so it should be sharing the main antenna.

Any suggestions?  Nothing pops out on the CONFIG list, and I had three TMP
cables plugged into the SubRX module, there were only 3 jacks I saw.  There
were no unplugged ends inside the case.  There was one leftover TMP
cable... I thought it was for the 144 module I don't have.  I may have to
open it up and re-check all the TMP cables.  Unless it's a simpler fix.

73 de Chuck, WS1L

--


===================
Chuck Chandler
[hidden email]
===================
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Sub-RX no signals

Chuck Chandler
Never mind...

Walked back through the setup and realized I hadn't set the installed SubRX
filters on all modes... just CW.

All seems fine with the SubRX now.

73 de Chuck, WS1L

On Sun, Feb 26, 2017 at 9:50 AM, Chuck Chandler <[hidden email]>
wrote:

> Well, the Sub receiver was installed this morning, filters and config
> seemed to complete without problem.
>
> However, the Sub-RX does not seem to be getting any signals.  I see the
> Ant=Main when I use B-Set, so it should be sharing the main antenna.
>
> Any suggestions?  Nothing pops out on the CONFIG list, and I had three TMP
> cables plugged into the SubRX module, there were only 3 jacks I saw.  There
> were no unplugged ends inside the case.  There was one leftover TMP
> cable... I thought it was for the 144 module I don't have.  I may have to
> open it up and re-check all the TMP cables.  Unless it's a simpler fix.
>
> 73 de Chuck, WS1L
>
> --
>
>
> ===================
> Chuck Chandler
> [hidden email]
> ===================
>



--


===================
Chuck Chandler
[hidden email]
===================
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]