Sub Receiver RTTY Decode

[Frank Westphal]

I am using a Navigator interface with an Elecraft K3.  The Navigator is
connected to the K3 with a factory made cable.  The system works great
on channel one with HRD/MMTTY/MixW software.
I would like to be able to decode RTTY received on VFO B of the K3 when
working DX split.  The K3 line out has the right channel as VFO B audio
and the Navigator cable has a wire for channel 2.  I have tried MMTTY
selecting the right channel on the options misc menu.  I have also tried
MixW using the /2 parameter when launching the program for 2 channel
operation.  HRD shows a left and right channel on the sound card screen
but I don't see any way to set it in the program options.
No matter what program or options I try adjusting, the channel 2 control
on the Navigator does not cause the audio on channel 2 to increase from
zero.  I don't know if the Navigator channel 2 is broken or if I am
missing something in the setup or is it just not possible to do what I
am trying to do.
I would appreciate hearing from anyone who have successfully set up a
Navigator and K3 to decode RTTY from VFO B on channel 2.
73,
Frank
K6FW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html