This might be something obvious I am overlooking.
I have experienced a few instances of the sub RX tuning knob freezing.
I spin the knob but the frequency does not change.
Sometimes turning the unit off and then back on gets things moving
again.
I have tried linking and unlinking the sub Rx. No change.
I suspect I have done something with a menu or control setting but I
don't know what I could have done.
The radio is equipped as follows:
K3/100
KAT3
KRX3
KXV3A
KDVR3
KBPF3 (in main Rx)
Main has 13, 6, 2.8, 1.7 and 250 filters
Sub has 6 and 2.8.
I am powering off of an Astron RS-35M with a battery backup monitored by
a West Mountain Powergate PG40s.
Because I am using AGM backup batteries, per instructions the voltage
setting of the RS-35m was increased to 14.5 volts.
The radio had a full factory workover in June and should be in good
operating order.
I am using the latest beta firmware.
I DO NOT have the P3.
I am wondering if it is the firmware, I don't recall this happening
before.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
