Elecraft

Sub on 80/75M

Classic

List

Threaded

4 messages Options

JAY-3

Sub on 80/75M

Good Morning All,
I am having an issue on 80/75 SSB.
A set to 3.833 and B set to to 3.883
A is LSB
B is AM-S with the S flashing.
I have tried BSET to change the AM-S to LSB or any other mode. It keeps
going back to AM-S
I know I am missing something to save that setting. And I know I did
something to put that into that mode. Please don't ask me what cus I don't
know.
In advance THANKS for all your thoughts.

--
73

KI4TXP JAY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Don Wilhelm

Re: Sub on 80/75M

Jay,

There is more than one way to "skin a cat".
Set VFO A, and then do a double tap on the A>B button to transfer the
frequency, mode, and all to VFO B.
Then tune VFO B to whatever frequency you wish.

73,
Don W3FPR

On 3/19/2019 10:35 AM, JAY wrote:

> Good Morning All,
> I am having an issue on 80/75 SSB.
> A set to 3.833 and B set to to 3.883
> A is LSB
> B is AM-S with the S flashing.
> I have tried BSET to change the AM-S to LSB or any other mode. It keeps
> going back to AM-S
> I know I am missing something to save that setting. And I know I did
> something to put that into that mode. Please don't ask me what cus I don't
> know.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Igor Sokolov-2

Pair of K3 in master-slave mode

I wonder if somebody knows of an easy way to make a pair of K3 (both
with subRX) work in master-slave mode. In other words I want to tune one
K3 and want the second K3 follow. The idea is to have 4 antennas
connected to 4 receivers so that 4 directions can be monitored
simultaneously in contests so polling from a contest logger is also in
the mix. If possible, a hardware solution would be the best but software
solution is also OK.

73, Igor UA9CDC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Bob Wilson, N6TV

Re: Pair of K3 in master-slave mode

In theory (I have not tried it), one could send an AI2; command to the
Master K3, to enable "AUTO INFO mode 2," then connect the two K3s to each
other using a male-to-male null-modem cable (pins 2 and 3 crossed). Then
the Slave K3 should track the Master K3.

To get a logging program working on Master, you may want to use a K3S (or
K3 with KIO3B upgrade), using the USB port used for the logger control, and
connect the RJ45 to DE9 "pigtail" to the Slave via a "one-way" null-modem
cable. Pin 2 on the pigtail (Master) would be connected to Pin 3 on the
Slave. Pin 5 (GND) would be connected straight through. Do not connect
Pin 2 on the Slave to Pin 3 on the Master, so the communication is only one
way: Master to Slave.

Note: AI2; mode doesn't output every movement of the VFO knobs. It only
sends the new frequency to the other radio when you stop turning the knob,
so the slave tracking would not be instantaneous; there would be a delay.

Another option would be to try the experimental "Tracking" feature of a
microHAM MK2R+ (firmware 7.5 or later).

73,
Bob, N6TV

On Tue, Mar 19, 2019 at 11:37 AM Igor Sokolov <[hidden email]> wrote:

> I wonder if somebody knows of an easy way to make a pair of K3 (both
> with subRX) work in master-slave mode. In other words I want to tune one
> K3 and want the second K3 follow. The idea is to have 4 antennas
> connected to 4 receivers so that 4 directions can be monitored
> simultaneously in contests so polling from a contest logger is also in
> the mix. If possible, a hardware solution would be the best but software
> solution is also OK.
>
> 73, Igor UA9CDC
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>