Elecraft

Sub reciever

classic Classic list List threaded Threaded
♦
♦
 5 messages Options
William Lagerberg
Reply | Threaded
Open this post in threaded view
♦
♦
|

Sub reciever

William Lagerberg
 

Hi list

 

I am getting crazy, my sub reciever looks like it is not recieving anymore.

 

KRX3 is on Atu mode so should get an antenne signal  both antenne 1 and 2
connected

 

I have KXV3 which is on  

 

KAT3 ATU  auto

 

Even connected a antenne on the BNC of the KXV3.

 

I think i am forgetting  something, but even with manual i just dont get it
to recieve.

 

Audio on, 2 speakers connected and haedphone connected

Can hear audio from reciever and sub reciever seperate, but no reception in
sub reciever good reception in main

 

I dont have a aux connector, but when i switch sub on it says   USE AUX

 

What am i missing...

 

Regards William Pe1bsb

 

 

 

 

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Steve Ellington-2
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: Sub reciever

Steve Ellington-2
Config: KRX3A
Change to ANT = ATU

On Sun, Dec 6, 2015 at 4:54 PM, [hidden email] <
[hidden email]> wrote:

>
>
> Hi list
>
>
>
> I am getting crazy, my sub reciever looks like it is not recieving anymore.
>
>
>
> KRX3 is on Atu mode so should get an antenne signal  both antenne 1 and 2
> connected
>
>
>
> I have KXV3 which is on
>
>
>
> KAT3 ATU  auto
>
>
>
> Even connected a antenne on the BNC of the KXV3.
>
>
>
> I think i am forgetting  something, but even with manual i just dont get it
> to recieve.
>
>
>
> Audio on, 2 speakers connected and haedphone connected
>
> Can hear audio from reciever and sub reciever seperate, but no reception in
> sub reciever good reception in main
>
>
>
> I dont have a aux connector, but when i switch sub on it says   USE AUX
>
>
>
> What am i missing...
>
>
>
> Regards William Pe1bsb
>
>
>
>
>
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
jh3sif
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: Sub reciever

jh3sif
In reply to this post by William Lagerberg

> I dont have a aux connector, but when i switch sub on it says   USE AUX

If the Sub RX frequency is outside BPF range selected for Main RX frequency, K3 says USE AUX.

de JH3SIF, Keith

> 2015/12/07 6:54、[hidden email] <[hidden email]> のメール：
>
>
>
> Hi list
>
>
>
> I am getting crazy, my sub reciever looks like it is not recieving anymore.
>
>
>
> KRX3 is on Atu mode so should get an antenne signal  both antenne 1 and 2
> connected
>
>
>
> I have KXV3 which is on  
>
>
>
> KAT3 ATU  auto
>
>
>
> Even connected a antenne on the BNC of the KXV3.
>
>
>
> I think i am forgetting  something, but even with manual i just dont get it
> to recieve.
>
>
>
> Audio on, 2 speakers connected and haedphone connected
>
> Can hear audio from reciever and sub reciever seperate, but no reception in
> sub reciever good reception in main
>
>
>
> I dont have a aux connector, but when i switch sub on it says   USE AUX
>
>
>
> What am i missing...
>
>
>
> Regards William Pe1bsb
>
>
>
>
>
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
hf4me
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: Sub reciever

hf4me
In reply to this post by William Lagerberg
I just thought I had the same thing.  Switching A/B and still dead.
Numerous other things too.  Went to BSET and it had Ant 2 selected.  Changed
to an antenna that wasn't grounded and all is fine.

I think the radios test us once in a while just to see how long it takes us
to figure it out.

73, Jim KG0KP

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of
[hidden email]
Sent: Sunday, December 06, 2015 3:55 PM
To: [hidden email]
Subject: [Elecraft] Sub reciever

 

Hi list

 

I am getting crazy, my sub reciever looks like it is not recieving anymore.

 

KRX3 is on Atu mode so should get an antenne signal  both antenne 1 and 2
connected

 

I have KXV3 which is on  

 

KAT3 ATU  auto

 

Even connected a antenne on the BNC of the KXV3.

 

I think i am forgetting  something, but even with manual i just dont get it
to recieve.

 

Audio on, 2 speakers connected and haedphone connected

Can hear audio from reciever and sub reciever seperate, but no reception in
sub reciever good reception in main

 

I dont have a aux connector, but when i switch sub on it says   USE AUX

 

What am i missing...

 

Regards William Pe1bsb

 

 

 

 

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Gary Gregory-2
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: Sub reciever

Gary Gregory-2
Seriously?, how long has it taken you to figure that out?

Sigh....ask me how I know

Yesterday I .....um, no, I refuse to embarrass myself yet again

Gary

-----Original Message-----
From: "Jim Miller" <[hidden email]>
Sent: ‎7/‎12/‎2015 11:05 AM
To: "'[hidden email]'" <[hidden email]>; "[hidden email]" <[hidden email]>
Subject: Re: [Elecraft] Sub reciever

I just thought I had the same thing.  Switching A/B and still dead.
Numerous other things too.  Went to BSET and it had Ant 2 selected.  Changed
to an antenna that wasn't grounded and all is fine.

I think the radios test us once in a while just to see how long it takes us
to figure it out.

73, Jim KG0KP

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of
[hidden email]
Sent: Sunday, December 06, 2015 3:55 PM
To: [hidden email]
Subject: [Elecraft] Sub reciever

 

Hi list

 

I am getting crazy, my sub reciever looks like it is not recieving anymore.

 

KRX3 is on Atu mode so should get an antenne signal  both antenne 1 and 2
connected

 

I have KXV3 which is on  

 

KAT3 ATU  auto

 

Even connected a antenne on the BNC of the KXV3.

 

I think i am forgetting  something, but even with manual i just dont get it
to recieve.

 

Audio on, 2 speakers connected and haedphone connected

Can hear audio from reciever and sub reciever seperate, but no reception in
sub reciever good reception in main

 

I dont have a aux connector, but when i switch sub on it says   USE AUX

 

What am i missing...

 

Regards William Pe1bsb

 

 

 

 

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Free forum by Nabble Edit this page