Subject: Re: K4
Locked
 
|
I definitely would like to see mouse control for the P3... The current
buttons and especially the rotary encoder are stiff enough so that the unit moves when they are pushed. With a mouse controlling these features the unit is not touched. A USB port to allow the use of a wired mouse or a dongle with a wireless mouse would be ideal. Also, the addition of a HDMI port in addition to the SVGA. More of the larger monitors are coming without SVGA inputs. It would also be a way to send l&r audio to speakers in the monitor. HDMI can be used for split screen video (PIP) allowing several windows with different displays to be shown on a single large monitor. An additional rotary encoder on the front panel of the K4 to allow for 1-5-10-20-50 KHz tuning steps across the band. Currently, the RIT/XIT knob can be reconfigured for that function. A small slot on the back of the radio to accept a computer cable lock for use when the radio will be used at public events like Field Day, etc. This should be added to the whole line. It will not stop a determined thief, but it will deter some. A couple of more antenna ports on the back to allow several different antennas with memories for the tuner settings for each. More programmable memory buttons so that voice recorder is not using the same ones as CW or Digital. Backlighting on all the buttons and controls...... 50 Amp power pole connecter for incoming power, keyed so that the KPA1500 power cable will not connect. 2 standard size power plugs for aux power out to P3, etc. Main power cable upgraded to #6 wire. Jim W6US ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Mouse control for the P3. Yes please.
Mike Murphy KI8R > On May 19, 2018, at 6:48 PM, Jim Shepherd <[hidden email]> wrote: > > I definitely would like to see mouse control for the P3... The current > buttons and especially the rotary encoder are stiff enough so that the unit > moves when they are pushed. With a mouse controlling these features the > unit is not touched. A USB port to allow the use of a wired mouse or a > dongle with a wireless mouse would be ideal. > > Also, the addition of a HDMI port in addition to the SVGA. More of the > larger monitors are coming without SVGA inputs. It would also be a way to > send l&r audio to speakers in the monitor. HDMI can be used for split > screen video (PIP) allowing several windows with different displays to be > shown on a single large monitor. > > An additional rotary encoder on the front panel of the K4 to allow for > 1-5-10-20-50 KHz tuning steps across the band. Currently, the RIT/XIT knob > can be reconfigured for that function. > > A small slot on the back of the radio to accept a computer cable lock for > use when the radio will be used at public events like Field Day, etc. This > should be added to the whole line. It will not stop a determined thief, > but it will deter some. > > A couple of more antenna ports on the back to allow several different > antennas with memories for the tuner settings for each. > > More programmable memory buttons so that voice recorder is not using the > same ones as CW or Digital. > > Backlighting on all the buttons and controls...... > > 50 Amp power pole connecter for incoming power, keyed so that the KPA1500 > power cable will not connect. 2 standard size power plugs for aux power out > to P3, etc. Main power cable upgraded to #6 wire. > > Jim W6US > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
How about we just get the KPOD to talk to the P3 as was stated in Wayne's
posting of April 18,2016: Snipped... We'll also be able to execute P3 macros directly from K-Pod switches, as well as use the K-Pod's knob to control the marker knob on the P3. 73, Wayne N6KR This was a major consideration when the order was placed. Two years and nothing. 73, Bob K2TK ex KN2TKR (1956) & K2TKR On 5/19/2018 11:33 PM, Michael Murphy wrote: > Mouse control for the P3. Yes please. > > Mike Murphy > KI8R > >> On May 19, 2018, at 6:48 PM, Jim Shepherd <[hidden email]> wrote: >> >> I definitely would like to see mouse control for the P3... The current >> buttons and especially the rotary encoder are stiff enough so that the unit >> moves when they are pushed. With a mouse controlling these features the >> unit is not touched. A USB port to allow the use of a wired mouse or a >> dongle with a wireless mouse would be ideal. >> >> Also, the addition of a HDMI port in addition to the SVGA. More of the >> larger monitors are coming without SVGA inputs. It would also be a way to >> send l&r audio to speakers in the monitor. HDMI can be used for split >> screen video (PIP) allowing several windows with different displays to be >> shown on a single large monitor. >> >> An additional rotary encoder on the front panel of the K4 to allow for >> 1-5-10-20-50 KHz tuning steps across the band. Currently, the RIT/XIT knob >> can be reconfigured for that function. >> >> A small slot on the back of the radio to accept a computer cable lock for >> use when the radio will be used at public events like Field Day, etc. This >> should be added to the whole line. It will not stop a determined thief, >> but it will deter some. >> >> A couple of more antenna ports on the back to allow several different >> antennas with memories for the tuner settings for each. >> >> More programmable memory buttons so that voice recorder is not using the >> same ones as CW or Digital. >> >> Backlighting on all the buttons and controls...... >> >> 50 Amp power pole connecter for incoming power, keyed so that the KPA1500 >> power cable will not connect. 2 standard size power plugs for aux power out >> to P3, etc. Main power cable upgraded to #6 wire. >> >> Jim W6US >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |