I have absolutely no dip in the center of my LP-Pan display and I have never
heard anybody else having this problem either. The IF out port and the
crystal filter bank are driven in parallel by a buffer amplifier that
appears to be capable of driving both without gain loss due to the crystal
filter load.
AB2TC - Knut
-------------
Knut,
That is because you are probably using one of the programs written
for use with the LP-Pan. They incorporate a shift in the frequency
and probably that takes care of handling the filter issue (???). I
am using the LP-Pan with digital sw for eme which is not designed for
the LP-Pan or the K3. I am the only one using this equipment with MAP65.
I included my experience for anyone having a similar issue. The
solution is easy (read the original post).
Solution of the +6 KHz freq, offset in the LP-Pan LO was to install a
different xtal in the LO (thanks to Larry, N8LP).
73, Ed
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
