The K2 is no more sensitive the RF hash from a power supply (or other noise
producing devices) than other radios.
BUT - since the K2 is more sensitive, and can receive lower level signals of
any kind, yes it will hear even weaker RF signals - and if the RF hash from
a power supply can reach your antenna system, it will be received just like
any other signal.
A lot does depend on your antenna system - which includes the feedline right
down to the transceiver. If your feedline picks up radiation that is
generated in the hamshack, any transceiver will receive it just like a
signal. The cure is to install a proper feedline that does not radiate (if
it does not radiate, it will also not pick up signals) - a proper antenna
system will ideally receive only signals that appear at the antenna.
Unfortunately, not all antenna systems are perfect in that regard.
73,
Don W3FPR
> -----Original Message-----
>
> Hi, I was just wondering if the K2 (and other Elecraft rigs) are
> sensitive to hash from the newer switching type supplies?
>
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.10.21/96 - Release Date: 9/10/2005
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
