T1 and remote control - works just fine

[GS-3]

Hi list!

Just these days I received my T1 kit and the next evening (abt. 4hrs) was
his. No problems while building though a little bit confused over the
picture showing the battery terminals for installation. First tests showed
it well functioning. The next day I tried several different antenna setups
with T1 and K1. Everything solved by the T1.

At the end I added a remote control switch plus cable for portable use. 10m
RG58 for RF and 10m RG174 for the remote function in parallel. Makes for a
nice setup!

Did QSOs on all 4 bands of my K1 with 10m vertical wire and 4 band-specific
radials.

Keep on building!


Gerhard Schwanz
DH3FAW
http://www.gs-personal.de


       

       
               
___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Paul Gates]

This is good, Gerhard... I am waiting for my T1
Paul Gates
K1  #0231
KX1 #1186
XG1
[hidden email]


----- Original Message -----
From: "Gerhard Schwanz" <[hidden email]>
To: <[hidden email]>
Sent: Friday, July 08, 2005 9:54 AM
Subject: [Elecraft] T1 and remote control - works just fine

> Hi list!
>
> Just these days I received my T1 kit and the next evening (abt. 4hrs) was
> his. No problems while building though a little bit confused over the
> picture showing the battery terminals for installation. First tests showed
> it well functioning. The next day I tried several different antenna setups
> with T1 and K1. Everything solved by the T1.
>
> At the end I added a remote control switch plus cable for portable use.
> 10m
> RG58 for RF and 10m RG174 for the remote function in parallel. Makes for a
> nice setup!
>
> Did QSOs on all 4 bands of my K1 with 10m vertical wire and 4
> band-specific
> radials.
>
> Keep on building!
>
>
> Gerhard Schwanz
> DH3FAW
> http://www.gs-personal.de
>
>
>
>
>
>
> ___________________________________________________________
> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
> anmelden: http://mail.yahoo.de
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com