T1: resistance check problems before final assembly

[John Shadle]

On p. 22 of the T1 assembly manual it states that "resistance between D3
anode and the "-" pad near D7" should be >100Kohms. That's good.

However, it then states that when I press S1 I should see resistance
between 117k and 130k ohms. I have 148k ohms.

Is this a problem? If so, what should I check? I've tried switching the
leads of my multimeter, but that doesn't appear to affect anything.

Thanks for your help.
-john W4PAH
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html