TX Noise Gate on KX3 kills VOX delay setting
Locked
TX Noise Gate on KX3 kills VOX delay setting
 
|
When the TX Noise Gate is set to “On” with any gate level more than “00” the VOX delay setting is ignored and the VOX drops out immediately. Is this by design?
I am using MCU version 2.34 and DSP version 1.33 Michael Blake [hidden email] <mailto:[hidden email]> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: TX Noise Gate on KX3 kills VOX delay setting
|
|
Has anyone else noticed this TX Noise Gate versus VOX Delay setting interaction?
Michael Blake [hidden email] <mailto:[hidden email]> > On Apr 29, 2016, at 7:08 PM, Michael Blake <[hidden email]> wrote: > > When the TX Noise Gate is set to “On” with any gate level more than “00” the VOX delay setting is ignored and the VOX drops out immediately. Is this by design? > > I am using MCU version 2.34 and DSP version 1.33 > > Michael Blake > [hidden email] <mailto:[hidden email]> > > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: TX Noise Gate on KX3 kills VOX delay setting
|
|
Yes I noticed this a while ago. I never use VOX on SSB, but I do use the noise gate which is excellent. I consider it a bug I must say.
Another gotcha is if you have SSB+CW ON and VOX is OFF, the Keyer will key the amplifier Keyline out at the CW rate! 73 from David GM4JJJ > On 30 Apr 2016, at 15:36, Michael Blake <[hidden email]> wrote: > > Has anyone else noticed this TX Noise Gate versus VOX Delay setting interaction? > > Michael Blake > [hidden email] <mailto:[hidden email]> > > > > > > >> On Apr 29, 2016, at 7:08 PM, Michael Blake <[hidden email]> wrote: >> >> When the TX Noise Gate is set to “On” with any gate level more than “00” the VOX delay setting is ignored and the VOX drops out immediately. Is this by design? >> >> I am using MCU version 2.34 and DSP version 1.33 >> >> Michael Blake >> [hidden email] <mailto:[hidden email]> >> >> >> >> >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: TX Noise Gate on KX3 kills VOX delay setting
|
|
In reply to this post by Michael Blake
I only received two customer responses and they both confirmed what I am seeing on my KX3. I have forwarded the issue as a “bug” to Elecraft support.
Michael Blake [hidden email] <mailto:[hidden email]> > On Apr 30, 2016, at 10:36 AM, Michael Blake <[hidden email]> wrote: > > Has anyone else noticed this TX Noise Gate versus VOX Delay setting interaction? > > Michael Blake > [hidden email] <mailto:[hidden email]> > > > > > > >> On Apr 29, 2016, at 7:08 PM, Michael Blake <[hidden email]> wrote: >> >> When the TX Noise Gate is set to “On” with any gate level more than “00” the VOX delay setting is ignored and the VOX drops out immediately. Is this by design? >> >> I am using MCU version 2.34 and DSP version 1.33 >> >> Michael Blake >> [hidden email] <mailto:[hidden email]> >> >> >> >> >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: TX Noise Gate on KX3 kills VOX delay setting
|
|
Thanks Michael, let us know when you hear anything back from them.
I wonder if the same thing happens with a K3? 73 from David GM4JJJ > On 2 May 2016, at 18:41, Michael Blake <[hidden email]> wrote: > > I only received two customer responses and they both confirmed what I am seeing on my KX3. I have forwarded the issue as a “bug” to Elecraft support. > > Michael Blake > [hidden email] <mailto:[hidden email]> > > > > > > >> On Apr 30, 2016, at 10:36 AM, Michael Blake <[hidden email]> wrote: >> >> Has anyone else noticed this TX Noise Gate versus VOX Delay setting interaction? >> >> Michael Blake >> [hidden email] <mailto:[hidden email]> >> >> >> >> >> >> >>> On Apr 29, 2016, at 7:08 PM, Michael Blake <[hidden email]> wrote: >>> >>> When the TX Noise Gate is set to “On” with any gate level more than “00” the VOX delay setting is ignored and the VOX drops out immediately. Is this by design? >>> >>> I am using MCU version 2.34 and DSP version 1.33 >>> >>> Michael Blake >>> [hidden email] <mailto:[hidden email]> >>> >>> >>> >>> >>> >>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[hidden email] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to [hidden email] >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: TX Noise Gate on KX3 kills VOX delay setting
|
|
I do not have a clue David as I only have the KX3. Elecraft support has acknowledged receiving the report so we will see what happens.
Michael Blake - K9JRI > On May 2, 2016, at 3:45 PM, David Anderson <[hidden email]> wrote: > > Thanks Michael, let us know when you hear anything back from them. > > I wonder if the same thing happens with a K3? > > 73 from David GM4JJJ > >> On 2 May 2016, at 18:41, Michael Blake <[hidden email] <mailto:[hidden email]>> wrote: >> >> I only received two customer responses and they both confirmed what I am seeing on my KX3. I have forwarded the issue as a “bug” to Elecraft support. >> >> Michael Blake >> [hidden email] <mailto:[hidden email]> <mailto:[hidden email] <mailto:[hidden email]>> >> >> >> >> >> >> >>> On Apr 30, 2016, at 10:36 AM, Michael Blake <[hidden email]> wrote: >>> >>> Has anyone else noticed this TX Noise Gate versus VOX Delay setting interaction? >>> >>> Michael Blake >>> [hidden email] <mailto:[hidden email]> >>> >>> >>> >>> >>> >>> >>>> On Apr 29, 2016, at 7:08 PM, Michael Blake <[hidden email]> wrote: >>>> >>>> When the TX Noise Gate is set to “On” with any gate level more than “00” the VOX delay setting is ignored and the VOX drops out immediately. Is this by design? >>>> >>>> I am using MCU version 2.34 and DSP version 1.33 >>>> >>>> Michael Blake >>>> [hidden email] <mailto:[hidden email]> >>>> >>>> >>>> >>>> >>>> >>>> >>>> ______________________________________________________________ >>>> Elecraft mailing list >>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>> Help: http://mailman.qth.net/mmfaq.htm >>>> Post: mailto:[hidden email] >>>> >>>> This list hosted by: http://www.qsl.net >>>> Please help support this email list: http://www.qsl.net/donate.html >>>> Message delivered to [hidden email] >>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[hidden email] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to [hidden email] >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft> >> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm> >> Post: mailto:[hidden email] <mailto:[hidden email]> >> >> This list hosted by: http://www.qsl.net <http://www.qsl.net/> >> Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html> >> Message delivered to [hidden email] <mailto:[hidden email]> Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: TX Noise Gate on KX3 kills VOX delay setting
|
|
In reply to this post by Elecraft mailing list
Michael,
Did you hear back from Elecraft on the noise Gate VOX delay bug? 73 from David GM4JJJ > On 2 May 2016, at 20:45, David Anderson <[hidden email]> wrote: > > Thanks Michael, let us know when you hear anything back from them. > > I wonder if the same thing happens with a K3? > > 73 from David GM4JJJ > >> On 2 May 2016, at 18:41, Michael Blake <[hidden email]> wrote: >> >> I only received two customer responses and they both confirmed what I am seeing on my KX3. I have forwarded the issue as a “bug” to Elecraft support. >> >> Michael Blake >> [hidden email] <mailto:[hidden email]> >> >> >> >> >> >> >>> On Apr 30, 2016, at 10:36 AM, Michael Blake <[hidden email]> wrote: >>> >>> Has anyone else noticed this TX Noise Gate versus VOX Delay setting interaction? >>> >>> Michael Blake >>> [hidden email] <mailto:[hidden email]> >>> >>> >>> >>> >>> >>> >>>> On Apr 29, 2016, at 7:08 PM, Michael Blake <[hidden email]> wrote: >>>> >>>> When the TX Noise Gate is set to “On” with any gate level more than “00” the VOX delay setting is ignored and the VOX drops out immediately. Is this by design? >>>> >>>> I am using MCU version 2.34 and DSP version 1.33 >>>> >>>> Michael Blake >>>> [hidden email] <mailto:[hidden email]> >>>> >>>> >>>> >>>> >>>> >>>> >>>> ______________________________________________________________ >>>> Elecraft mailing list >>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>> Help: http://mailman.qth.net/mmfaq.htm >>>> Post: mailto:[hidden email] >>>> >>>> This list hosted by: http://www.qsl.net >>>> Please help support this email list: http://www.qsl.net/donate.html >>>> Message delivered to [hidden email] >>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[hidden email] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to [hidden email] >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |