The P3 TX monitor automatically detects what type of sensor is
installed. The sensor includes a resistor connected to one of the
connector pins. The P3 reads the resistor value to figure out which
sensor (200W HF, 2 kW HF or VHF) is installed.
Alan N1AL
On 08/05/2015 07:56 AM, hsherriff wrote:
>
>
> Received mine yesterday. Was thinking of making a switching box to switch between sensors. Looking at the manual, looks like you need to tell the P3 the span of the current sensor. Could do this via a arduino but the programmer's manual hasn't been updated for the TXmonitor. Anyone know the commands associated with the monitor functions?
> Harlan NC3C
>
>
> Sent from my Verizon Wireless 4G LTE smartphone
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
