Temp Readings

I've been trying to determine what the FP and the PA temps are during FD and the book says that  you should be able to tap DISP and then use VFO B to see PA xxC in the alternate display.  This does not happen.  Was this changed in a update?  I bet I am doing something wrong.

Lee
K0WA



In our day and age it seems that Common Sense is in short supply.  If you don't have any Common Sense - get some Common Sense and use it.  If you can't find any Common Sense, ask for help from somebody who has some Common Sense.  Is Common Sense divine?
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Brett Howard]

Go into the config menu and set TECH MD to on then repeat the steps you
mentioned below.


On Sat, 2008-06-28 at 22:37 -0700, Lee Buller wrote:

> I've been trying to determine what the FP and the PA temps are during FD and the book says that  you should be able to tap DISP and then use VFO B to see PA xxC in the alternate display.  This does not happen.  Was this changed in a update?  I bet I am doing something wrong.
>
> Lee
> K0WA
>
>
>
> In our day and age it seems that Common Sense is in short supply.  If you don't have any Common Sense - get some Common Sense and use it.  If you can't find any Common Sense, ask for help from somebody who has some Common Sense.  Is Common Sense divine?
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Bob Cunnings NW8L]

CONFIG:TECH MD must be ON to see temperatures - despite what pg. 34 of
the manual seems to imply under "VFO B Alternate Displays".

Bob NW8L

On Sat, Jun 28, 2008 at 11:37 PM, Lee Buller <[hidden email]> wrote:

>
> I've been trying to determine what the FP and the PA temps are during FD and the book says that  you should be able to tap DISP and then use VFO B to see PA xxC in the alternate display.  This does not happen.  Was this changed in a update?  I bet I am doing something wrong.
>
> Lee
> K0WA
>
>
>
> In our day and age it seems that Common Sense is in short supply.  If you don't have any Common Sense - get some Common Sense and use it.  If you can't find any Common Sense, ask for help from somebody who has some Common Sense.  Is Common Sense divine?
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com