I finally was able to get my upgraded K-3 to recognize my K-3 utility via USB. I deleted the utility from my computer and reloaded it, then left the K-3 with the power disconnected over night. This morning I connected the USB cable to the computer and then started it. I waited to make sure it was recognized by the computer. I then connected it to my K-3 with the power still off. I connected the power cable and started the utility. When I turned the K-3 on, it connected with the utility and I was able to use it. There must have been something corrupted in the system. Everything works as it should now and the upgrades have also helped the K-3. Thanks to everyone for the advise given.
PSent from my iPad
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
