Thanks to those that helped

[Vic K2VCO]

Thanks to everyone that answered my OT question about getting capacitor goop off of PC
boards. I managed to remove about 8 leaking SMD aluminum can capacitors without destroying
it, cleaned it with alcohol flux remover, then distilled water, and replaced the caps.
Success! My old TS850S works again.

This used to be THE contest radio. But time and technology have passed it by. It's worth
keeping, though. It has a good general coverage receiver and dynamic range similar to the
K2. And it's not a bad SSB rig, if you like that stuff.

Apparently the board -- the carrier oscillator board -- is famous for having been built
with caps that go bad after 20 years or so (my radio was built in 1991). This would never
happen to an Elecraft product!
--
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html