Tilt stand information please

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Tilt stand information please

Stephen G4SJP
I'm having a clear-out.  I have no recollection of why I have it, but I have
found a tilt stand complete with mounting hardware etc.

The label on the bag says ETS15, yet I don't believe that the tilt stand
inside is the same height. The one in the bag measures about 2 1/4 inches in
height.  Is that the ETS2?  And I wonder which one is the standard tilt on
the EC2 enclosure?  It looks like I may have bought the ETS15 and swapped
over tilt stands, putting my original tilt stand back in the bag with the
mounting hardware unused, since I was only replacing the metal stand bit
itself.

Before I offer it for sale however, I need to be more positive about its
exact type, is it ETS15 or ET2?

Thanks and 73,

Stephen G4SJP
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Tilt stand information please

Don Wilhelm-4
Stephen,

If the height measures 2 1/4 inches, it is the ETS2 which will elevate
the front of the K2 (or EC2 enclosure) 3 inches above the table.

73,
Don W3FPR

On 8/21/2011 2:50 PM, Stephen Prior wrote:

> I'm having a clear-out.  I have no recollection of why I have it, but I have
> found a tilt stand complete with mounting hardware etc.
>
> The label on the bag says ETS15, yet I don't believe that the tilt stand
> inside is the same height. The one in the bag measures about 2 1/4 inches in
> height.  Is that the ETS2?  And I wonder which one is the standard tilt on
> the EC2 enclosure?  It looks like I may have bought the ETS15 and swapped
> over tilt stands, putting my original tilt stand back in the bag with the
> mounting hardware unused, since I was only replacing the metal stand bit
> itself.
>
> Before I offer it for sale however, I need to be more positive about its
> exact type, is it ETS15 or ET2?
>
> Thanks and 73,
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html