I have installed the 160 option in the K2. I get normal adjustable power out
of the low power section on 160 without the KPA 100 online. With the KPA100
online, I cannot get any power out of the K2 at all. I start at minimum
power, then start to adjust the power up, I get no power output and when I
go above 11 watts, the relays click, the display on the K2 blanks out and it
resets, like it is seeing high SWR? Need some help here. The option seems to
be working on the base K2, no power out of the KPA 100 on 160. I get very
normal function on all of the other bands with the KPA100. Any clues? Also,
with the receive antenna set to on, when I punch the ant 1/2 button on the
front panel, I get the not installed message. When I switch the antenna on
and off in the menu, it is switching from the main to the receive antenna,
as witnessed by the change in the receive signals.
Jess AE0CW
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
