Timekeeping (was Re: CODEC)

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Timekeeping (was Re: CODEC)

Elecraft mailing list
You might as well say, why use an OS that was originally designed to run
on 16 bit hardware.

Like Windows (and I'm /not/ a MS fan)  Meinberg (and others including
NTP/NTPD itself) have moved on along with the times.

It's the NTP protocol handling that's important, not the GUI you see.  
But by all means use a recent implementation as there have been security
(DDoS) issues with some implementations of NTP in the not too distant
past.   But that's only an issue if you plan to make "Your" time,
available to others on the Internet.

There is nothing stopping you from building your own local shack GPS
driven NTP server either.  Use a R'Pi etc.

https://satsignal.eu/ntp/Raspberry-Pi-NTP.html

or

https://robrobinette.com/pi_GPS_PPS_Time_Server.htm

for example.   You can then sync all your shack PC's to the same time,
not needing any external internet, though it's useful for when a GPS RX
fails, or it's power supply...

73.

Dave G0WBX


------------------------------------------------------------------------
On 09/10/18 13:29, [hidden email] wrote:
> But if they want to install a third party time sync program they are
> better off installing W3HCF's definitive implementation of the NTP
> protocol, rather than a program that was, I believe, really designed for
> Windows 3.1/95.

--
Created on and sent from a Unix like PC running and using free and open source software.
::

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Timekeeping (was Re: CODEC)

Elecraft mailing list
I'm running Mieinberg NTP service and all our international access is
via geosat. NTP status is showing for the currently selected stratum 1
source 573.909 delay, 1.022 offset and 6.176 jitter.

wsjt-x FT8 DT on most decodes are running at 0.1 to 0.3 with a few
strays out to 0.7 to 1.0 and one W station at -2.7

Regards,

Mike VP8NO



On 09/10/2018 10:14, Dave B via Elecraft wrote:
> You might as well say, why use an OS that was originally designed to run
> on 16 bit hardware.
>
> Like Windows (and I'm /not/ a MS fan)  Meinberg (and others including
> NTP/NTPD itself) have moved on along with the times.
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]