Transverters on the K2, IF Frequencies, No 10 Mhz Option?

[Elecraft mailing list]

As per the K60XV Assembly and Operating Instructions Page 18  "The IF field can be set to 7, 10, 14, 21, or 28 MHz."
When I go to set the IF the options are only 7, 14, 21, or 28 MHz.  The 10 MHz option is not available.

I'm running the latest firmware v1.09 on the K2 and v1.02 on the K60XV   (or so I would believe it to be as this is a new K2).

Can anyone check to see if they have 10 MHz as an IF option on their K2.

Thank you
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Harry,

Do you have 10MHz mapped out for the band selection process?

73,
Don W3FPR

On 2/28/2017 6:16 PM, Harry Yingst via Elecraft wrote:
>
> As per the K60XV Assembly and Operating Instructions Page 18  "The IF field can be set to 7, 10, 14, 21, or 28 MHz."
> When I go to set the IF the options are only 7, 14, 21, or 28 MHz.  The 10 MHz option is not available.
>
> I'm running the latest firmware v1.09 on the K2 and v1.02 on the K60XV   (or so I would believe it to be as this is a new K2).
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Elecraft mailing list]

I am unable to select 10 Mhz for an IF for transverter use only selections are 7,14,21, or 28

10 Mhz is enabled (can you disable a band on the K2) and works as a regular band.






      From: Don Wilhelm <[hidden email]>
 To: Harry Yingst <[hidden email]>; Elecraft Reflector <[hidden email]>
 Sent: Tuesday, February 28, 2017 8:37 PM
 Subject: Re: [Elecraft] Transverters on the K2, IF Frequencies, No 10 Mhz Option?
   
Harry,

Do you have 10MHz mapped out for the band selection process?

73,
Don W3FPR

On 2/28/2017 6:16 PM, Harry Yingst via Elecraft wrote:
>
> As per the K60XV Assembly and Operating Instructions Page 18  "The IF field can be set to 7, 10, 14, 21, or 28 MHz."
> When I go to set the IF the options are only 7, 14, 21, or 28 MHz.  The 10 MHz option is not available.
>
> I'm running the latest firmware v1.09 on the K2 and v1.02 on the K60XV  (or so I would believe it to be as this is a new K2).
>


   
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]