> (I put the Kx3 in USB, hit data and set it to 45baud AFSK A and
> decodetext.)
You are *inverted*. Select AFSK_A instead of USB - that will put
you into *lower sideband mode* which is the traditional "sense"
for RTTY.
AFSK traditionally uses 2125/2295 Hz tones (or 1275/1445 Hz) with
the lower tone (*higher* RF frequency) representing MARK. The
*only time* one would use USB is if using *brain dead software*
written by a programmer who has no concept of tradition and is
*too lazy* to provide the option to use LSB. However, if you are
using the internal encoder/decoder in an Elecraft transceiver use
AFSK_A.
73,
... Joe, W4TV
On 7/3/2016 4:51 PM, Doug Millar via Elecraft wrote:
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]