Trying to get LP-100 PLOT to make K3 output carrier

[Jim Stafford-3]

Anyone done this.  I did it a long time ago with an ICOM but have
never gotten the K3 to key.  It changes the frequency and mode, etc
so I know the connection is good but I've tried DTR RTS and RTS DTR on
the PTT-KEY
option but to no avail.  There is only a K2 method of interfacing between
rig and software so that may not be the best for the K3.

I have also tried using the "Kenwood" interfacing to the rig.  It appears to
key the K3, the red light comes on, but does not KEY the rig to get
output power.  I can at that point during the 1 second intervals, key
the rig manually and get a data point for each and a plot for the band.  
Just can't
get it to work all automatically.

Thoughts?

jim/w4qo
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html