Tuning VFO control

[dbp tds.net]

Hi-
 Tuning VFO-A also tunes VFO-B. I want to change that. I want VFO-A to just control VFO-A, and VFO-B just to control VFO-B.
 Now, if VFO-B is set to a different frequency than VFO-A, the two will retain their different frequencies and will track continuing that separation by turning VFO-A.
 VFO-B only tunes VFO-B.
 I can tune VFO-B to a different frequency and then shift it into VFO-A position as I should. Then VFO-A continues to tune both and retain that new separation in frequency.
 I don't have the sub receiver and no transverters.

I'm sure their is a simple solution, I just keep missing it.

73 de Dvae, K1OPQ
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Jim Cox]

See Operator Manual Addendum on linking and unlinking the VFOs.

Jim K4JAF


----- Original Message -----
From: "Dave" <[hidden email]>
To: "Elecraft" <[hidden email]>
Sent: Thursday, July 03, 2008 7:39 AM
Subject: [Elecraft] Tuning VFO control

> Hi-
> Tuning VFO-A also tunes VFO-B. I want to change that. I want VFO-A to just
> control VFO-A, and VFO-B just to control VFO-B.
> Now, if VFO-B is set to a different frequency than VFO-A, the two will
> retain their different frequencies and will track continuing that
> separation by turning VFO-A.
> VFO-B only tunes VFO-B.
> I can tune VFO-B to a different frequency and then shift it into VFO-A
> position as I should. Then VFO-A continues to tune both and retain that
> new separation in frequency.
> I don't have the sub receiver and no transverters.
>
> I'm sure their is a simple solution, I just keep missing it.
>
> 73 de Dvae, K1OPQ
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[KK7P]

>  Tuning VFO-A also tunes VFO-B. I want to change that...

HOLD Sub to toggle LINK|UNLINK.

73,

Lyle KK7P

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com