TxG update

[Mike Kasrich]

TxG error is appearing only on 40m.  xmit ok on all bands swr is fine.  
but showing error on 40.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bill W4ZV]

Mike Kasrich wrote

TxG error is appearing only on 40m.  xmit ok on all bands swr is fine.  
but showing error on 40.

Check for a bad solder joint around the 40m toroids on the filter board.  You can probably scrape the insulation from top side with an X-Acto knife and re-solder without having to remove the toroid.  I had a similar problem on 60m with one of my units.

http://www.mail-archive.com/[e-mail]/msg75799.html

73,  Bill