Unstable power control on 40M SSB

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

Unstable power control on 40M SSB

Steve Kavanagh
Bill:

It could be the problem I and some others had, where
there was a bit too much gain through the transmit
chain when the KPA-100 is installed for the ALC to
maintain control (in my case it was worst on 80m).
Here is a link to my "problem solved" post, which also
links to my original problem post.  I can probably
root around and find some off-list correspondence I
had on this subject if you would like more info.

http://www.ac6rm.net/mailarchive/html/elecraft-list/2005-12/msg00702.html

I believe there has been at least one case of similar
symptoms that were not fixed by the cure I used,
however.

73,
Steve VE3SMA

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com 
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Serial Number Milestone

Darrell Snedecor
Number 6000 has arrived.  Time to get to work!

Darrell
Formerly KB9AV
Working to get it back



_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: Serial Number Milestone

wayne burdick
Administrator
Congratulations, Darrell. Even thought the number itself is only
symbolic, we have high hopes for your K2  :)

73,
Wayne
N6KR


> Number 6000 has arrived.  Time to get to work!
>
> Darrell
> Formerly KB9AV
> Working to get it back
>

---

http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: Serial Number Milestone

Gil Stacy-2
In reply to this post by Darrell Snedecor
Darrell,
Was it delivered by Ed McMahon??  Congratulations.
73, Gil NN4CW
K2#3104; KX1-53
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com