Update failed
Locked
 
|
I was able to update to MCU 1.68, but the DSP update failed.
I am using Vista and the usb to serial adapter. Any thoughts? Thanks Al AD9P |
|
|
Hi Al,
Are you using the latest drivers from the Prolific site? I had a similar problem that I fixed with a driver refresh. Raj, N2RD -- Rajiv Dewan, N2RD [hidden email] FN13fc -- On Feb 18, 2008, at 7:59 PM, AD9P wrote: > > I was able to update to MCU 1.68, but the DSP update failed. > I am using Vista and the usb to serial adapter. > Any thoughts? > Thanks > Al > AD9P > -- > View this message in context: http://www.nabble.com/Update-failed-tp15550818p15550818.html > Sent from the Elecraft mailing list archive at Nabble.com. > > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
In reply to this post by AD9P
I just updated with Utility version 1.1.1.28 and Vista Home Basic @ 4800 baud and it worked fine. I do have a problem with saving a configuration though. The utility crashes at the end when it tries to save the config file. A file is saved in the directory but I have not tried to upload it yet to test the integrity.
Dave - NZ6D |
|
|
I have one more report of this as well. I'm on the road right now and won't
be home until Thursday. I'll dig into it ASAP when I get back. If the file has the CRC-32 line at the bottom, it's complete and should be OK for restore. I pass the file twice during restore, once to verify that it is complete (and hasn't been tampered with) and once again to actually update the radio. So it's safe to try to restore from the file. There's not much going on between writing that last line and writing the status line. Obviously I have some problem that I'll dig into. Would you elaborate on "The Utility crashes"? What symptoms did you observe? TU & 73 de Dick, K6KR -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of NZ6D - Dave Sent: Monday, February 18, 2008 6:08 PM To: [hidden email] Subject: Re: [Elecraft] Update failed I just updated with Utility version 1.1.1.28 and Vista Home Basic @ 4800 baud and it worked fine. I do have a problem with saving a configuration though. The utility crashes at the end when it tries to save the config file. A file is saved in the directory but I have not tried to upload it yet to test the integrity. Dave - NZ6D -- View this message in context: http://www.nabble.com/Update-failed-tp15550818p15550843.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
In reply to this post by nz6d
I have the same problem saving the configuration. Program creates the file, then terminates abnormallly with: "Elecraft K3 Urility has stopped working".
Problem signature: Problem Event Name: APPCRASH Application Name: K3Util.exe Application Version: 1.1.1.28 Application Timestamp: 479e087e Fault Module Name: kernel32.dll Fault Module Version: 6.0.6000.16386 Fault Module Timestamp: 4549bd80 Exception Code: c0000005 Exception Offset: 00027b3d OS Version: 6.0.6000.2.0.0.768.3 Locale ID: 1033 Additional Information 1: 2b08 Additional Information 2: e57a9ba576353f3de1b4e60912ba09d8 Additional Information 3: b7c3 Additional Information 4: 518bffbd84a3b6b8ad61e0198052e6c4 Running under Vista. The utility updated the firmware with no problem. Have not tried restoring from one of the saved files. Bob, K5LLF
|
|
|
In reply to this post by Dick Dievendorff
I had the same thing happen saving configurations. Program abended:
Vista details: Problem signature: Problem Event Name: APPCRASH Application Name: K3Util.exe Application Version: 1.1.1.28 Application Timestamp: 479e087e Fault Module Name: kernel32.dll Fault Module Version: 6.0.6000.16386 Fault Module Timestamp: 4549bd80 Exception Code: c0000005 Exception Offset: 00027b3d OS Version: 6.0.6000.2.0.0.768.3 Locale ID: 1033 Additional Information 1: 2b08 Additional Information 2: e57a9ba576353f3de1b4e60912ba09d8 Additional Information 3: b7c3 Additional Information 4: 518bffbd84a3b6b8ad61e0198052e6c4 Bob, K5LLF
|
|
|
In reply to this post by Bob
This is indeed a bug, and it's been fixed in a subsequent version of the K3
Utility that is still being tested by the Field Test team. We'll be releasing a new version in the near future that has this fixed (and some other goodies). The configuration file you saved is fine. The crash occurs when the K3 Utility trying to change the status line message to "configuration saved" after the config file has been closed. The code passed a resource identifier when a string was expected. If you examine the config file with an editor like Notepad, notice that the last line contains a CRC32 line. That's the end of the config file, if it's there, the file is intact. I apologize for the bug. It's embarrassing, but there's no data loss. 73 de Dick, K6KR -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of K5LLF Sent: Wednesday, February 27, 2008 9:52 PM To: [hidden email] Subject: Re: [Elecraft] Update failed I have the same problem saving the configuration. Program creates the file, then terminates abnormallly with: "Elecraft K3 Urility has stopped working". Problem signature: Problem Event Name: APPCRASH Application Name: K3Util.exe Application Version: 1.1.1.28 Application Timestamp: 479e087e Fault Module Name: kernel32.dll Fault Module Version: 6.0.6000.16386 Fault Module Timestamp: 4549bd80 Exception Code: c0000005 Exception Offset: 00027b3d OS Version: 6.0.6000.2.0.0.768.3 Locale ID: 1033 Additional Information 1: 2b08 Additional Information 2: e57a9ba576353f3de1b4e60912ba09d8 Additional Information 3: b7c3 Additional Information 4: 518bffbd84a3b6b8ad61e0198052e6c4 Running under Vista. The utility updated the firmware with no problem. Have not tried restoring from one of the saved files. Bob, K5LLF NZ6D - Dave wrote: > > I just updated with Utility version 1.1.1.28 and Vista Home Basic @ 4800 > baud and it worked fine. I do have a problem with saving a configuration > though. The utility crashes at the end when it tries to save the config > file. A file is saved in the directory but I have not tried to upload it > yet to test the integrity. > > Dave - NZ6D > -- View this message in context: http://www.nabble.com/Update-failed-tp15550818p15730233.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |