Update on Build of K2 #5324

[m0bmn]

HI all

 

Doesn’t time fly,

I started 5324 on Thursday and now im upto the second stage test,

One Question, I have had is a missing part (RP1) from the front panel which
means the switches don’t work correctly (Scotts sending me one)  . I have
another working K2 here so I will “borrow” that front plate to test

My new one, I will use the new control board so I don’t see that that should
be any problem do you???

Im Looking forward to doing the test’s in the morning and will report back
with my results, good or bad later.

All the best

Paul

M0BMN

 

 

 


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.23/243 - Release Date: 27/01/2006
 
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Brown-4]

Hi

That depends on the serial number. If the older K2 is below 3000 and has not
had the A to B mods installed then then the front panel, control board and
RF board are not interchangeable. If both K2 are above 3000 then you are
fine.

Don Brown



----- Original Message -----
From: "Paul Webb" <[hidden email]>
To: <[hidden email]>
Sent: Sunday, January 29, 2006 7:11 PM
Subject: [Elecraft] Update on Build of K2 #5324


HI all



Doesn’t time fly,

I started 5324 on Thursday and now im upto the second stage test,

One Question, I have had is a missing part (RP1) from the front panel which
means the switches don’t work correctly (Scotts sending me one)  . I have
another working K2 here so I will “borrow” that front plate to test

My new one, I will use the new control board so I don’t see that that should
be any problem do you???

Im Looking forward to doing the test’s in the morning and will report back
with my results, good or bad later.

All the best

Paul

M0BMN

 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com 
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com