Using K2/100 on QRP

[Kenneth Moorman]

I have the K2/100 with the KPA100 and KAT100 mounted in the separate EC2
enclosure.  I would like to use the K2/10 in a portable situation
independently, leaving the 100 watt components here in the shack.  I have no
concern with the uncabling part of the operation, but I am wondering if
there is some menu item(s) I must reset after getting the K2/10 separated
from its high-powered components.  This is the first time I have
contemplated such operation since obtaining the amp/tuner about 18 months
ago, and I can't remember what if anything I did to the menu items to get
both "boxes" working together.  I feel sure that this has been done by many
folks who can quickly set me on the right path.  Thanks.

73,

Ken, NU4I

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-4]

Ken,

No need to change anything, just unplug the cables and go.
OTOH, if you are running on a small battery and want to extend its life
as long as possible, there are some menu settings like GRAPH=BAR and
OPT=PERF that can be changed to minimize current draw - those do not
have to be changed, but under some conditions, you may want to.

73,
Don W3FPR

Kenneth Moorman wrote:

> I have the K2/100 with the KPA100 and KAT100 mounted in the separate EC2
> enclosure.  I would like to use the K2/10 in a portable situation
> independently, leaving the 100 watt components here in the shack.  I have no
> concern with the uncabling part of the operation, but I am wondering if
> there is some menu item(s) I must reset after getting the K2/10 separated
> from its high-powered components.  This is the first time I have
> contemplated such operation since obtaining the amp/tuner about 18 months
> ago, and I can't remember what if anything I did to the menu items to get
> both "boxes" working together.  I feel sure that this has been done by many
> folks who can quickly set me on the right path.  Thanks.
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com