Using K3 with HRD

[Jim Wilson]

Rich,

Yes, I can hear the audio on the K3 speaker.
I thought I should hear it also on the PC speaker
since HRD provides for remote operation of  a K3
which would necessarily include audio.

Perhaps I expected more than was warranted.

Man, thanks for your response.

Jim - W4RKS

>The PC speaker is connected to the PC's >internal sound card. For data
>modes you said you are using the USB codec in >the KIO3B, which is not
>connected to the PC speaker. Try using a >speaker connected to the K3's
>SPKR output (or the internal speaker) to >monitor the audio instead.

___________
>* Using a K3
*>* KIO3 B (The new board)
*>* "Y" cable connected to P3 via the RS232/P3 connection
*>* USB cable from the K3 USB to a Windows 7 (32) PC USB port
*>* The P3/Config RS232 is set to "USB"
*>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Rick WA6NHC-2]

You can go into the driver settings for the USB audio (Mic, Listen tab)
properties and check the "Listen to this device' which will tell you
what is coming in via your computer speakers.

Rick nhc

On 2/8/2016 12:30 PM, James Wilson wrote:

> Rich,
>
> Yes, I can hear the audio on the K3 speaker.
> I thought I should hear it also on the PC speaker
> since HRD provides for remote operation of  a K3
> which would necessarily include audio.
>
> Perhaps I expected more than was warranted.
>
> Man, thanks for your response.
>
> Jim - W4RKS
>
>> The PC speaker is connected to the PC's >internal sound card. For data
>> modes you said you are using the USB codec in >the KIO3B, which is not
>> connected to the PC speaker. Try using a >speaker connected to the K3's
>> SPKR output (or the internal speaker) to >monitor the audio instead.
> ___________
>> * Using a K3
> *>* KIO3 B (The new board)
> *>* "Y" cable connected to P3 via the RS232/P3 connection
> *>* USB cable from the K3 USB to a Windows 7 (32) PC USB port
> *>* The P3/Config RS232 is set to "USB"
> *>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]