Have you configured the K3 for DATA A, MENU:MIC SEL=LINE IN and set
up audio levels in microKEYER and your sound card as documented in
"Setting Audio Levels" in the MK Users Manual?
I have no experience with M110A but MK and the K3 should operate the
same way for any audio based data mode. I know the audio set-up
instructions work just fine for AFSK, PSK31/63/125, JT65/JT9, MFSK,
DominoEX, Contestia, Olivia, etc.
73,
... Joe, W4TV
On 5/31/2016 3:50 PM, Nathern Priddy via Elecraft wrote:
> Has anyone been able to get the MARS soundcard mode M110A working with their K3 and an original microKeyer? I tried to get the program working using DATA A, but I get almost no output power. With the K3 set to 50 watts, I get maybe 5 watts output as monitored with a Bird wattmeter.
>
> M110A is a wideband mode that is not allowed on the ham bands, but is widely used within MARS for digital traffic.
>
> M110A works great with my old TS-2000 and a homebrew, passive soundcard interface.
>
> Barry Priddy - K5VIP
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
