Elecraft › [K3]

Using PS with Otlher Manufacture's Transceivers

Classic

List

Threaded

3 messages Options

W3cmp

Using PS with Otlher Manufacture's Transceivers

Hello all:

I expect this topic has already been discussed but I would like to
know where to get information about using the P3 with Kenwood transceivers,
specifically the TS-570 and 870. I appreciate the help in pointing me to
that information. Thanks. Chris Patterson W3CMP
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

N5GE

Re: Using PS with Otlher Manufacture's Transceivers

Chris,

The P3 has instructions for use with non-K3 rigs.

If you are considering getting a P3, then you can download the P3 manual from:
http://www.elecraft.com/manual/P3%20Owners%20Manual%20Errata%20A7-1.pdf

On Fri, 18 Feb 2011 13:42:06 EST, [hidden email] wrote:

>Hello all:
>
> I expect this topic has already been discussed but I would like to
>know where to get information about using the P3 with Kenwood transceivers,
>specifically the TS-570 and 870. I appreciate the help in pointing me to
>that information. Thanks. Chris Patterson W3CMP
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Amateur Radio Operator N5GE

Alan Bloom-2

Re: Using PS with Otlher Manufacture's Transceivers

In reply to this post by W3cmp

Both the TS-570 and TS-870 use an 8.83 MHz IF. Go into the P3's "Xcvr
Sel" menu and select "8830 kHz (inverted)".

The TS-870 does have a wide-band IF output connector, but I believe
you'll have to modify the TS-570 to add one.

Alan N1AL

On Fri, 2011-02-18 at 13:42 -0500, [hidden email] wrote:

> Hello all:
>
> I expect this topic has already been discussed but I would like to
> know where to get information about using the P3 with Kenwood transceivers,
> specifically the TS-570 and 870. I appreciate the help in pointing me to
> that information. Thanks. Chris Patterson W3CMP
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html