I use the K3 as an IF for transverters. This has worked well for some
time now. I had originally used the 10 watt model, but recently
upgraded by adding the 100 watt amplifier. Now the issue begins.
9 transverter slots are not enough for the bands I have; 50-24192MHz,
which is 11 bands with two more coming some day.
When I did not have the amplifier, there seemed to be no issue, I
programmed the logging software to use an offset and the K3 ended up on
28MHz as it usually does, but without the actual frequency display.
btw, thanks for the recent firmware mod to display the full frequency
momentarily: (1296, etc)
Now, with the amplifier, when I select one of the bands the radio seems
to automatically assume that I am going to transmit full power on 10 meters.
How can I instruct the radio to use the XVTR ports when not using trn1-9?
Also, I could use more trn's.
thanks
Phil K3(352)TUF
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
