Using a straight key and microKeyer II with an Elecraft K3

[Richard-3]

I believe I've read that you can use both a straight key and a
microKeyer II by using a TRS Y plugged into the K3, and then plugging
the straight key into one receptacle and the microKeyer II into the
other receptacle.

Is there a better way to connect both a straight key and paddles with
this system ( microKeyer II and K3)?

Thought I'd better verify before I tried it.  Thanks.  I"m working on my
Morse code and would like to practice separately with my paddles and my
straight key.  If I can set it up permanently I'll probably get more
practice than if I have to plug one in and then the other.

Thanks.

Rich NU6T
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html