Using the K2 while assembling the KP!100 doable?

[Ron Greene]

I'm at the point in the KPA100 assembly where I need to make mods to the
K2 Control board just prior to the KPA100 Assembly Part II and I'm
wondering if I can still operate the K2 while carrying on with the KPA
assembly at least until it's time to start the Alignment steps that once
again require connection to the K2.

I'm a slow builder and I sure would like to be able to get on the air in
the mean time.

Thanks,
Ron
N6IB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Ron,

Read about those mods carefully again.  If your K2 serial number is
greater than 3000, the mods are already included on your control board.  
Do not make any cuts until you are certain.

If your K2 Serial is 2999 or lower, yes add the changes to the control
board.
Yes, the K2 will operate very well with these changes in place.  
However, the sidetone source must be set to U8-4 once the changes have
been made or you will not hear sidetone.

73,
Don W3FPR

Ron Greene wrote:

> I'm at the point in the KPA100 assembly where I need to make mods to the
> K2 Control board just prior to the KPA100 Assembly Part II and I'm
> wondering if I can still operate the K2 while carrying on with the KPA
> assembly at least until it's time to start the Alignment steps that once
> again require connection to the K2.
>
> I'm a slow builder and I sure would like to be able to get on the air in
> the mean time.
>
> Thanks,
> Ron
> N6IB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.238 / Virus Database: 270.11.28/2022 - Release Date: 03/25/09 07:16:00
>
>  

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html