That did it! One of those "Duh" moments. Thanks to all.Steve - KD9HL
On Wednesday, September 30, 2015 2:57 PM, Don Wilhelm <
[hidden email]> wrote:
Steve,
VFO LNK was changed with MCU firmware 5.10 - VFO Linking is now a menu
item CONFIG: VFO LNK. That is a per band setting.
Go to 17 meters, enter the CONFIG MENU and change it to OFF.
It may be a good idea to read the firmware release notes and make a
notation in the manual when changes like this are made.
73,
Don W3FPR
On 9/30/2015 3:43 PM, Steve Mollman wrote:
> I have a K3 without the sub-receiver. When on 17 meters only, VFO B tracks VFO A. I want to un-link them.
> I have tried pushing the "SUB" button to un-link them as described on pages 6, 14, 22 and 37 of the manual and page 108 of Fred Cady's book. When the "SUB" button is pushed (either momentary or holding) I just get the message "NO SUB". Nothing else happens. Firmware is up to date.
> This is driving me batty! Does anybody have any ideas as to how to un-link the VFO's? On the other bands they are un-linked and work fine.
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
