Hey gang.
Just double checking my setup. I'm using a PK-232sc+ for sound card modes,
FSK RTTY, CW, and PACTOR with my K3s. I recently added the K144XV and since
everything is already hooked up, I tried sending packet. After tweaking the
AFSK control on the PK for proper deviation and proper ALC, I gave it a shot
to the local BBS and it works great! Hit a Winlink gateway or two and used
a digipeater for a few more - worked great.
My question, is there a "mode" setting to do what I am doing, or will I need
to change the MIC input to Line-In every time I want to do FM packet instead
of FM voice? Currently that's the only way to make it work. On SSB,
changing to data opens the Line-In for data. Just curious for FM.
BTW: It is interesting to see the open carrier waveform on the P3 of
various 2 meter FM repeaters. Some look "clean" in my opinion and some look
"dirty" with no voice modulation even though the dead air sounds the same.
I enjoy my K3s setup more every time I use it!
Hank
K4HYJ
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
