I have uploaded Version 1.0.2 of K3 Filter Tools to
my web site: http://mysite.verizon.net/ks7d It
fixes a couple of bugs in the program and adds some
enhancements:
Bug fixes:
·
Tech
Mode not turned on when dBV Linear Range or Filter Sweep procedures initiated
resulting in meaningless data output if users K3 not already set to
Tech Mode On;
·
Reset
K3 button not disabled when dBV Linear
Range
or Filter Sweep procedures running;
Enhancements:
·
Program
now checks for presence of KAT3 ATU. If KAT3 is installed user is alerted to
bypass it before running test;
·
Added
support for serial ports COM 11 through COM 20;
·
Program
now sets AF Gain at low value (005) before AGC is turned off to prevent loud
burst of sound when dBV Linear
Range
or Filter Sweep are initiated. AF Gain is reset to users initial setting when
Reset K3 button is clicked;
·
Moved
location and name of Begin Test button on dBV
Linear
Range
form to make it more intuitive that the Quick Test button does not use the RF
Gain start, stop and increment settings. Begin Test renamed to Full Test which
does use the RF gain entries made by the user.
·
Help
files have added topics and information to assist user in running dBV
Linear
Range
and Filter Sweep procedures.
More to come... I have several suggestions from users for
enhancements. Also, I will shortly be receiving my KRX3. After I install it I
will add the ability to run filter sweeps on the crystal filters installed on
the sub-receiver.
Thank you to all who have reported bugs and suggested
enhancements.
Mike, KS7D
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
