Not sure who had the modification for the Vibroplex Code Warrior JR posted but THANKS!
I removed the screws holding the paddles in place and replaced them with brass screws and washers (I used nuts as the hardware store did not have brass washers) and I now like the paddle.
I also used some nail polish (wifes…) on the bottom to hold them in place as they are “slightly loose” to give me a good feel. I also noticed I “had” washers underneath the paddle as well.
It has been a frustrating experience with the dits on my Code Warrior JR since new but replacing both screws and adding washers gave me a new paddle.
de KG9H
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
