When I first got the K3 this year for an expedition we are going on this
year, it was quite the change from my TS950.
I'd just go into the menu and set it as one normally would do...put it on a
dummy load and set the gain to 0. Then keep talking at a normal level while
increasing the gain while monitoring yourself . I set the gain to ensure the
best capture without any clipping....a few "notches" above first detection
The next is the anti-vox and that is, per the manual, set so the mic/headset
do not create a feedback situation
The last setting is the NOISE GATE and that will need some playing with as
its a function of ambient noise in the shack like amp fans , etc.
Then play with three items above while monitoring yourself for best overall
operation.
----- Original Message -----
From: "K5HM" <
[hidden email]>
To: <
[hidden email]>
Sent: Tuesday, February 26, 2013 7:41 PM
Subject: [Elecraft] Vox Settings
> Does anyone have some suggested starting VOX settings for a newbie K3
> owner?
> I used it for the first time tonight. Got great audio report.
>
> I'm using it with a boom mounted Heil GM-4. I'll probably have to move
> the
> boom mount off the desk where it can't pick up the vibration of something
> moving on the desktop.
>
> I realize that each person is unique but could use some suggestions.
>
> 73,
> Ron, K5HM
>
[hidden email]
> www.qrz.com/db/k5hm
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
