W-2 Wattmeter indications

[Phillip Buckholdt-2]

Hi all

Using my W-2 set to the 200W range and my K-3 set to 100W ATU in bypass and
connected to a dummy load the W2 reads 100W. IF I select AUTO the W2 reads
200W !  I only have the 200 W HF sensor.
    Just wondering if this normal behavior?

     Phil
     K8MBY

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Ed Muns, W0YK]

Key down carrier, CW, RTTY, SSB or ?  Also, what version firmware in the W2?

With older firmware and a varying signal, erroneous high readings are
possible.

Ed - W0YK
-----------------------------------------------
Ed Muns
Muns Vineyard - www.munsvineyard.com
FaceBook - www.facebook.com/munsvineyard

> Using my W-2 set to the 200W range and my K-3 set to 100W ATU
> in bypass and connected to a dummy load the W2 reads 100W. IF
> I select AUTO the W2 reads 200W !  I only have the 200 W HF sensor.
>     Just wondering if this normal behavior?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html