W1 software

[K5WA]

I finally got a chance to download and try the W1 software.  I could not get
it to recognize the attached W2.  The W2 Configuration utility recognizes
the W2 just fine.  I released the port when closing down the W2 Utility and
then made sure the port speed was correct before launching the W1 software.
Still no connection.  Is there something else I needed to do?

 

Thanks,

Bob K5WA

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[David Fleming-2]

Hi Bob,

You should be using the W2 interface software. Not W1. You can find it here:

http://www.elecraft.com/software/W2/elecraft_w2_software.htm

Regards and 73,

David, W4SMT

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[K5WA]

Thanks David.  I see that my keen eye for detail is still active.



-----Original Message-----
From: David Fleming [mailto:[hidden email]]
Sent: Monday, January 04, 2010 11:53 AM
To: K5WA
Cc: Elecraft reflector
Subject: Re: [Elecraft] W1 software

Hi Bob,

You should be using the W2 interface software. Not W1. You can find it here:

http://www.elecraft.com/software/W2/elecraft_w2_software.htm

Regards and 73,

David, W4SMT

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html