Then that's 2 happy chappies then Bert, for I've fixed 2 of my probs.
1st, had a err pll2 on tx calibration after the full build. Fault in
seating of the sub rx!! 2nd, my SPE Expert amp hooked up to the k3
for the first time would not put the amp in tx from the key out
socket fixed that but weird, switched off k3 and amp turned back on es
hey presto it decided to tx, oh well we live es learn!!
Ken..G0ORH
Ps....The K3 es SPE expert amp do go well together on the desk!
Sent from my iPhone
On 18 Dec 2009, at 03:09,
[hidden email] wrote:
> Thanks to K2AV, I solved my problem with calibrating my K3 TX
> output. The
> problem I was having was due to two things: first, I was using the
> owner's
> manual from August 2008 (when I got the rig)...the latest online
> version is
> quite different when it comes to TX calibration, and second, I found
> that
> the length of coax between the K3 and the pickup made a BIG
> difference as
> the frequency increased...changing to a 1-foot length made the
> difference!
>> From the pickup to the dummy load, it's only a 1-foot length of
>> RG-214.
>
> The help was appreciated. Quite an exercise in frustration!
>
> Happy Holidays to all,
>
> Bert, N4CW
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
