W2 Watt meter suggestion
Locked
 
|
I operate almost exclusively with digital modes so I would REALLY like to
see a new feature on the W2 sensor module to allow a tektronix scope to be connected for my K3 so I can monitor the transmission envelope. I have the CP1 directional coupler minimodule but putting that in line makes for a cluttered mess with at least two more connections to create issues. Any chance that this will be a future enhancement to the sensor module - or is there another easy way to connect a monitor scope that I am not seeing. Thanks Jobst AC0LP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
I'm sure it would be easy to add a pickup to the sensor yourself. It
could be done with a toroid transformer placed on the center pin of one of the coax connectors. On 14 Mar 2015 22:13, Jobst Vandrey wrote: > I operate almost exclusively with digital modes so I would REALLY like to > see a new feature on the W2 sensor module to allow a tektronix scope to be > connected for my K3 so I can monitor the transmission envelope. I have the > CP1 directional coupler minimodule but putting that in line makes for a > cluttered mess with at least two more connections to create issues. > > Any chance that this will be a future enhancement to the sensor module - or > is there another easy way to connect a monitor scope that I am not seeing. > > Thanks > > Jobst > AC0LP -- 73, Vic, 4X6GP/K2VCO Rehovot, Israel http://www.qsl.net/k2vco/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
A sensor is close to completion for the P3 which will do what you want i
believe. Perhaps you could ask Wayne for confirmation. Gary Vk1ZZ K3, KX3, KPA500-FT, KAT500-FT,P3. On 15/03/2015 6:51 AM, "Vic Rosenthal 4X6GP/K2VCO" <[hidden email]> wrote: > I'm sure it would be easy to add a pickup to the sensor yourself. It could > be done with a toroid transformer placed on the center pin of one of the > coax connectors. > > On 14 Mar 2015 22:13, Jobst Vandrey wrote: > >> I operate almost exclusively with digital modes so I would REALLY like to >> see a new feature on the W2 sensor module to allow a tektronix scope to be >> connected for my K3 so I can monitor the transmission envelope. I have >> the >> CP1 directional coupler minimodule but putting that in line makes for a >> cluttered mess with at least two more connections to create issues. >> >> Any chance that this will be a future enhancement to the sensor module - >> or >> is there another easy way to connect a monitor scope that I am not seeing. >> >> Thanks >> >> Jobst >> AC0LP >> > > -- > 73, > Vic, 4X6GP/K2VCO > Rehovot, Israel > http://www.qsl.net/k2vco/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by Jobst Vandrey-2
Gary
They have been "working" on that for how many years now? Harlan NC3C Sent from my Verizon Wireless 4G LTE smartphone <div>-------- Original message --------</div><div>From: Gary Gregory <[hidden email]> </div><div>Date:03/14/2015 5:14 PM (GMT-05:00) </div><div>To: Vic K2VCO <[hidden email]> </div><div>Cc: Elecraft List <[hidden email]> </div><div>Subject: Re: [Elecraft] W2 Watt meter suggestion </div><div> </div>A sensor is close to completion for the P3 which will do what you want i believe. Perhaps you could ask Wayne for confirmation. Gary Vk1ZZ K3, KX3, KPA500-FT, KAT500-FT,P3. On 15/03/2015 6:51 AM, "Vic Rosenthal 4X6GP/K2VCO" <[hidden email]> wrote: > I'm sure it would be easy to add a pickup to the sensor yourself. It could > be done with a toroid transformer placed on the center pin of one of the > coax connectors. > > On 14 Mar 2015 22:13, Jobst Vandrey wrote: > >> I operate almost exclusively with digital modes so I would REALLY like to >> see a new feature on the W2 sensor module to allow a tektronix scope to be >> connected for my K3 so I can monitor the transmission envelope. I have >> the >> CP1 directional coupler minimodule but putting that in line makes for a >> cluttered mess with at least two more connections to create issues. >> >> Any chance that this will be a future enhancement to the sensor module - >> or >> is there another easy way to connect a monitor scope that I am not seeing. >> >> Thanks >> >> Jobst >> AC0LP >> > > -- > 73, > Vic, 4X6GP/K2VCO > Rehovot, Israel > http://www.qsl.net/k2vco/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Harlen
Yep. However i have just got more info in the last coupla days. Please ask Wayne or Eric as there is more updated info coming very soon....:-) Gary Vk1ZZ K3, KX3, KPA500-FT, KAT500-FT,P3. On 15/03/2015 8:26 AM, "hsherriff" <[hidden email]> wrote: > Gary > They have been "working" on that for how many years now? > Harlan > NC3C > > > Sent from my Verizon Wireless 4G LTE smartphone > > > -------- Original message -------- > From: Gary Gregory <[hidden email]> > Date:03/14/2015 5:14 PM (GMT-05:00) > To: Vic K2VCO <[hidden email]> > Cc: Elecraft List <[hidden email]> > Subject: Re: [Elecraft] W2 Watt meter suggestion > > A sensor is close to completion for the P3 which will do what you want i > believe. > > Perhaps you could ask Wayne for confirmation. > > Gary > Vk1ZZ > K3, KX3, KPA500-FT, KAT500-FT,P3. > On 15/03/2015 6:51 AM, "Vic Rosenthal 4X6GP/K2VCO" <[hidden email]> > wrote: > > > I'm sure it would be easy to add a pickup to the sensor yourself. It > could > > be done with a toroid transformer placed on the center pin of one of the > > coax connectors. > > > > On 14 Mar 2015 22:13, Jobst Vandrey wrote: > > > >> I operate almost exclusively with digital modes so I would REALLY like > to > >> see a new feature on the W2 sensor module to allow a tektronix scope to > be > >> connected for my K3 so I can monitor the transmission envelope. I have > >> the > >> CP1 directional coupler minimodule but putting that in line makes for a > >> cluttered mess with at least two more connections to create issues. > >> > >> Any chance that this will be a future enhancement to the sensor module - > >> or > >> is there another easy way to connect a monitor scope that I am not > seeing. > >> > >> Thanks > >> > >> Jobst > >> AC0LP > >> > > > > -- > > 73, > > Vic, 4X6GP/K2VCO > > Rehovot, Israel > > http://www.qsl.net/k2vco/ > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[hidden email] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [hidden email] > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Dayton is coming, Dayton is coming!
Mike W0MU On 3/14/2015 4:51 PM, Gary Gregory wrote: > Harlen > > Yep. > > However i have just got more info in the last coupla days. > > Please ask Wayne or Eric as there is more updated info coming very > soon....:-) > > Gary > Vk1ZZ > K3, KX3, KPA500-FT, KAT500-FT,P3. > On 15/03/2015 8:26 AM, "hsherriff" <[hidden email]> wrote: > >> Gary >> They have been "working" on that for how many years now? >> Harlan >> NC3C >> >> >> Sent from my Verizon Wireless 4G LTE smartphone >> >> >> -------- Original message -------- >> From: Gary Gregory <[hidden email]> >> Date:03/14/2015 5:14 PM (GMT-05:00) >> To: Vic K2VCO <[hidden email]> >> Cc: Elecraft List <[hidden email]> >> Subject: Re: [Elecraft] W2 Watt meter suggestion >> >> A sensor is close to completion for the P3 which will do what you want i >> believe. >> >> Perhaps you could ask Wayne for confirmation. >> >> Gary >> Vk1ZZ >> K3, KX3, KPA500-FT, KAT500-FT,P3. >> On 15/03/2015 6:51 AM, "Vic Rosenthal 4X6GP/K2VCO" <[hidden email]> >> wrote: >> >>> I'm sure it would be easy to add a pickup to the sensor yourself. It >> could >>> be done with a toroid transformer placed on the center pin of one of the >>> coax connectors. >>> >>> On 14 Mar 2015 22:13, Jobst Vandrey wrote: >>> >>>> I operate almost exclusively with digital modes so I would REALLY like >> to >>>> see a new feature on the W2 sensor module to allow a tektronix scope to >> be >>>> connected for my K3 so I can monitor the transmission envelope. I have >>>> the >>>> CP1 directional coupler minimodule but putting that in line makes for a >>>> cluttered mess with at least two more connections to create issues. >>>> >>>> Any chance that this will be a future enhancement to the sensor module - >>>> or >>>> is there another easy way to connect a monitor scope that I am not >> seeing. >>>> Thanks >>>> >>>> Jobst >>>> AC0LP >>>> >>> -- >>> 73, >>> Vic, 4X6GP/K2VCO >>> Rehovot, Israel >>> http://www.qsl.net/k2vco/ >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[hidden email] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to [hidden email] >>> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Mike
You might be physic...:-) Gary Vk1ZZ K3, KX3, KPA500-FT, KAT500-FT,P3. On 15/03/2015 8:54 AM, "W0MU Mike Fatchett" <[hidden email]> wrote: > Dayton is coming, Dayton is coming! > > Mike W0MU > > On 3/14/2015 4:51 PM, Gary Gregory wrote: > >> Harlen >> >> Yep. >> >> However i have just got more info in the last coupla days. >> >> Please ask Wayne or Eric as there is more updated info coming very >> soon....:-) >> >> Gary >> Vk1ZZ >> K3, KX3, KPA500-FT, KAT500-FT,P3. >> On 15/03/2015 8:26 AM, "hsherriff" <[hidden email]> wrote: >> >> Gary >>> They have been "working" on that for how many years now? >>> Harlan >>> NC3C >>> >>> >>> Sent from my Verizon Wireless 4G LTE smartphone >>> >>> >>> -------- Original message -------- >>> From: Gary Gregory <[hidden email]> >>> Date:03/14/2015 5:14 PM (GMT-05:00) >>> To: Vic K2VCO <[hidden email]> >>> Cc: Elecraft List <[hidden email]> >>> Subject: Re: [Elecraft] W2 Watt meter suggestion >>> >>> A sensor is close to completion for the P3 which will do what you want i >>> believe. >>> >>> Perhaps you could ask Wayne for confirmation. >>> >>> Gary >>> Vk1ZZ >>> K3, KX3, KPA500-FT, KAT500-FT,P3. >>> On 15/03/2015 6:51 AM, "Vic Rosenthal 4X6GP/K2VCO" <[hidden email]> >>> wrote: >>> >>> I'm sure it would be easy to add a pickup to the sensor yourself. It >>>> >>> could >>> >>>> be done with a toroid transformer placed on the center pin of one of the >>>> coax connectors. >>>> >>>> On 14 Mar 2015 22:13, Jobst Vandrey wrote: >>>> >>>> I operate almost exclusively with digital modes so I would REALLY like >>>>> >>>> to >>> >>>> see a new feature on the W2 sensor module to allow a tektronix scope to >>>>> >>>> be >>> >>>> connected for my K3 so I can monitor the transmission envelope. I have >>>>> the >>>>> CP1 directional coupler minimodule but putting that in line makes for a >>>>> cluttered mess with at least two more connections to create issues. >>>>> >>>>> Any chance that this will be a future enhancement to the sensor module >>>>> - >>>>> or >>>>> is there another easy way to connect a monitor scope that I am not >>>>> >>>> seeing. >>> >>>> Thanks >>>>> >>>>> Jobst >>>>> AC0LP >>>>> >>>>> -- >>>> 73, >>>> Vic, 4X6GP/K2VCO >>>> Rehovot, Israel >>>> http://www.qsl.net/k2vco/ >>>> ______________________________________________________________ >>>> Elecraft mailing list >>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>> Help: http://mailman.qth.net/mmfaq.htm >>>> Post: mailto:[hidden email] >>>> >>>> This list hosted by: http://www.qsl.net >>>> Please help support this email list: http://www.qsl.net/donate.html >>>> Message delivered to [hidden email] >>>> >>>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[hidden email] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to [hidden email] >>> >>> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
and Visalia where Elecraft has been known to release new stuff!
Mike W0MU On 3/14/2015 4:55 PM, Gary Gregory wrote: > > Mike > > You might be physic...:-) > > Gary > Vk1ZZ > K3, KX3, KPA500-FT, KAT500-FT,P3. > > On 15/03/2015 8:54 AM, "W0MU Mike Fatchett" <[hidden email] > <mailto:[hidden email]>> wrote: > > Dayton is coming, Dayton is coming! > > Mike W0MU > > On 3/14/2015 4:51 PM, Gary Gregory wrote: > > Harlen > > Yep. > > However i have just got more info in the last coupla days. > > Please ask Wayne or Eric as there is more updated info coming very > soon....:-) > > Gary > Vk1ZZ > K3, KX3, KPA500-FT, KAT500-FT,P3. > On 15/03/2015 8:26 AM, "hsherriff" <[hidden email] > <mailto:[hidden email]>> wrote: > > Gary > They have been "working" on that for how many years now? > Harlan > NC3C > > > Sent from my Verizon Wireless 4G LTE smartphone > > > -------- Original message -------- > From: Gary Gregory <[hidden email] > <mailto:[hidden email]>> > Date:03/14/2015 5:14 PM (GMT-05:00) > To: Vic K2VCO <[hidden email] > <mailto:[hidden email]>> > Cc: Elecraft List <[hidden email] > <mailto:[hidden email]>> > Subject: Re: [Elecraft] W2 Watt meter suggestion > > A sensor is close to completion for the P3 which will do > what you want i > believe. > > Perhaps you could ask Wayne for confirmation. > > Gary > Vk1ZZ > K3, KX3, KPA500-FT, KAT500-FT,P3. > On 15/03/2015 6:51 AM, "Vic Rosenthal 4X6GP/K2VCO" > <[hidden email] <mailto:[hidden email]>> > wrote: > > I'm sure it would be easy to add a pickup to the > sensor yourself. It > > could > > be done with a toroid transformer placed on the center > pin of one of the > coax connectors. > > On 14 Mar 2015 22:13, Jobst Vandrey wrote: > > I operate almost exclusively with digital modes so > I would REALLY like > > to > > see a new feature on the W2 sensor module to allow > a tektronix scope to > > be > > connected for my K3 so I can monitor the > transmission envelope. I have > the > CP1 directional coupler minimodule but putting > that in line makes for a > cluttered mess with at least two more connections > to create issues. > > Any chance that this will be a future enhancement > to the sensor module - > or > is there another easy way to connect a monitor > scope that I am not > > seeing. > > Thanks > > Jobst > AC0LP > > -- > 73, > Vic, 4X6GP/K2VCO > Rehovot, Israel > http://www.qsl.net/k2vco/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > <mailto:[hidden email]> > > This list hosted by: http://www.qsl.net > Please help support this email list: > http://www.qsl.net/donate.html > Message delivered to [hidden email] > <mailto:[hidden email]> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > <mailto:[hidden email]> > > This list hosted by: http://www.qsl.net > Please help support this email list: > http://www.qsl.net/donate.html > Message delivered to [hidden email] > <mailto:[hidden email]> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > <mailto:[hidden email]> > > This list hosted by: http://www.qsl.net > Please help support this email list: > http://www.qsl.net/donate.html > Message delivered to [hidden email] <mailto:[hidden email]> > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > <mailto:[hidden email]> > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] <mailto:[hidden email]> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
My lips are sealed.....:-)
Gary Vk1ZZ K3, KX3, KPA500-FT, KAT500-FT,P3. On 15/03/2015 9:19 AM, "W0MU Mike Fatchett" <[hidden email]> wrote: > and Visalia where Elecraft has been known to release new stuff! > > Mike W0MU > > > On 3/14/2015 4:55 PM, Gary Gregory wrote: > > Mike > > You might be physic...:-) > > Gary > Vk1ZZ > K3, KX3, KPA500-FT, KAT500-FT,P3. > On 15/03/2015 8:54 AM, "W0MU Mike Fatchett" <[hidden email]> wrote: > >> Dayton is coming, Dayton is coming! >> >> Mike W0MU >> >> On 3/14/2015 4:51 PM, Gary Gregory wrote: >> >>> Harlen >>> >>> Yep. >>> >>> However i have just got more info in the last coupla days. >>> >>> Please ask Wayne or Eric as there is more updated info coming very >>> soon....:-) >>> >>> Gary >>> Vk1ZZ >>> K3, KX3, KPA500-FT, KAT500-FT,P3. >>> On 15/03/2015 8:26 AM, "hsherriff" <[hidden email]> wrote: >>> >>> Gary >>>> They have been "working" on that for how many years now? >>>> Harlan >>>> NC3C >>>> >>>> >>>> Sent from my Verizon Wireless 4G LTE smartphone >>>> >>>> >>>> -------- Original message -------- >>>> From: Gary Gregory <[hidden email]> >>>> Date:03/14/2015 5:14 PM (GMT-05:00) >>>> To: Vic K2VCO <[hidden email]> >>>> Cc: Elecraft List <[hidden email]> >>>> Subject: Re: [Elecraft] W2 Watt meter suggestion >>>> >>>> A sensor is close to completion for the P3 which will do what you want i >>>> believe. >>>> >>>> Perhaps you could ask Wayne for confirmation. >>>> >>>> Gary >>>> Vk1ZZ >>>> K3, KX3, KPA500-FT, KAT500-FT,P3. >>>> On 15/03/2015 6:51 AM, "Vic Rosenthal 4X6GP/K2VCO" <[hidden email] >>>> > >>>> wrote: >>>> >>>> I'm sure it would be easy to add a pickup to the sensor yourself. It >>>>> >>>> could >>>> >>>>> be done with a toroid transformer placed on the center pin of one of >>>>> the >>>>> coax connectors. >>>>> >>>>> On 14 Mar 2015 22:13, Jobst Vandrey wrote: >>>>> >>>>> I operate almost exclusively with digital modes so I would REALLY like >>>>>> >>>>> to >>>> >>>>> see a new feature on the W2 sensor module to allow a tektronix scope >>>>>> to >>>>>> >>>>> be >>>> >>>>> connected for my K3 so I can monitor the transmission envelope. I >>>>>> have >>>>>> the >>>>>> CP1 directional coupler minimodule but putting that in line makes for >>>>>> a >>>>>> cluttered mess with at least two more connections to create issues. >>>>>> >>>>>> Any chance that this will be a future enhancement to the sensor >>>>>> module - >>>>>> or >>>>>> is there another easy way to connect a monitor scope that I am not >>>>>> >>>>> seeing. >>>> >>>>> Thanks >>>>>> >>>>>> Jobst >>>>>> AC0LP >>>>>> >>>>>> -- >>>>> 73, >>>>> Vic, 4X6GP/K2VCO >>>>> Rehovot, Israel >>>>> http://www.qsl.net/k2vco/ >>>>> ______________________________________________________________ >>>>> Elecraft mailing list >>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>>> Help: http://mailman.qth.net/mmfaq.htm >>>>> Post: mailto:[hidden email] >>>>> >>>>> This list hosted by: http://www.qsl.net >>>>> Please help support this email list: http://www.qsl.net/donate.html >>>>> Message delivered to [hidden email] >>>>> >>>>> ______________________________________________________________ >>>> Elecraft mailing list >>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>> Help: http://mailman.qth.net/mmfaq.htm >>>> Post: mailto:[hidden email] >>>> >>>> This list hosted by: http://www.qsl.net >>>> Please help support this email list: http://www.qsl.net/donate.html >>>> Message delivered to [hidden email] >>>> >>>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[hidden email] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to [hidden email] >>> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] >> > > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by Jobst Vandrey-2
Great...... I was hoping it would be available before I retire next year..
Sent from my Verizon Wireless 4G LTE smartphone <div>-------- Original message --------</div><div>From: Gary Gregory <[hidden email]> </div><div>Date:03/14/2015 6:51 PM (GMT-05:00) </div><div>To: Harlan <[hidden email]> </div><div>Cc: Vic K2VCO <[hidden email]>, Elecraft List <[hidden email]> </div><div>Subject: Re: [Elecraft] W2 Watt meter suggestion </div><div> </div>Harlen Yep. However i have just got more info in the last coupla days. Please ask Wayne or Eric as there is more updated info coming very soon....:-) Gary Vk1ZZ K3, KX3, KPA500-FT, KAT500-FT,P3. On 15/03/2015 8:26 AM, "hsherriff" <[hidden email]> wrote: Gary They have been "working" on that for how many years now? Harlan NC3C Sent from my Verizon Wireless 4G LTE smartphone -------- Original message -------- From: Gary Gregory <[hidden email]> Date:03/14/2015 5:14 PM (GMT-05:00) To: Vic K2VCO <[hidden email]> Cc: Elecraft List <[hidden email]> Subject: Re: [Elecraft] W2 Watt meter suggestion A sensor is close to completion for the P3 which will do what you want i believe. Perhaps you could ask Wayne for confirmation. Gary Vk1ZZ K3, KX3, KPA500-FT, KAT500-FT,P3. On 15/03/2015 6:51 AM, "Vic Rosenthal 4X6GP/K2VCO" <[hidden email]> wrote: > I'm sure it would be easy to add a pickup to the sensor yourself. It could > be done with a toroid transformer placed on the center pin of one of the > coax connectors. > > On 14 Mar 2015 22:13, Jobst Vandrey wrote: > >> I operate almost exclusively with digital modes so I would REALLY like to >> see a new feature on the W2 sensor module to allow a tektronix scope to be >> connected for my K3 so I can monitor the transmission envelope. I have >> the >> CP1 directional coupler minimodule but putting that in line makes for a >> cluttered mess with at least two more connections to create issues. >> >> Any chance that this will be a future enhancement to the sensor module - >> or >> is there another easy way to connect a monitor scope that I am not seeing. >> >> Thanks >> >> Jobst >> AC0LP >> > > -- > 73, > Vic, 4X6GP/K2VCO > Rehovot, Israel > http://www.qsl.net/k2vco/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |