On Tue, 15 Dec 2009 15:22:05 -0500, "Roy Morris"
<
[hidden email]> wrote:
The DCHF-2000 will not use the two watt range.
>Why would I need a DCHF-200 coupler if the DCHF-2000 would provide low power readouts? The display unit has the bargraph ranges of 2, 20, 200 and 2000 watts. Why not buy two DCHF-2000 couplers, one between the K3 and linear amp and another between the amp and antenna tuner. This way one of the couplers could also be used with a second QRO station in the hamshack. I just don't understand why a DCHF-200 coupler is needed unless it can provide accurate power readings under one watt that the DCHF-2000 maybe cannot. Roy Morris W4WFB
>______________________________________________________________
>Elecraft mailing list
>Home:
http://mailman.qth.net/mailman/listinfo/elecraft>Help:
http://mailman.qth.net/mmfaq.htm>Post: mailto:
[hidden email]
>
>This list hosted by:
http://www.qsl.net>Please help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Amateur Radio Operator N5GE
Locked
