When my W2 is set to trip, or interrupt the PTT line, when the SWR rises above a preset level, the manual says to push the sensor or range button to reset the W2 and re-enable the PTT line. Problem is, I have to push the sensor or range buttons multiple times, usually four, to get the W2 to reset. And, if I push the range button, it changes the range in the process.
Does anyone else see this behavior? Running current firmware release.
Charles, K4ZRJ
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
