W2 failure

[Chris Tate - N6WM]

I have a W2 wattmeter that seems to have failed.  its powers up (leds flash on for a moment) but then almost immediately shuts down.  any thoughts on what may be on the blink or something that I can look at?

Chris
N6WM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bill K9YEQ]

Do you have the correct sensor on?

72 & 73,
Bill
K9YEQ
FT'er for K2, KX1, KX3, KXPA100,  KAT500, W2, etc.

-----Original Message-----
From: [hidden email] <[hidden email]> On Behalf Of Chris Tate - N6WM
Sent: Friday, April 13, 2018 5:07 PM
To: [hidden email]
Subject: [Elecraft] W2 failure

I have a W2 wattmeter that seems to have failed.  its powers up (leds flash on for a moment) but then almost immediately shuts down.  any thoughts on what may be on the blink or something that I can look at?

Chris
N6WM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Chris Tate - N6WM]

Ya.. it doesn't even get that far..

-----Original Message-----
From: Bill Johnson <[hidden email]>
Sent: Friday, April 13, 2018 3:13 PM
To: Chris Tate - N6WM <[hidden email]>; [hidden email]
Subject: RE: W2 failure

Do you have the correct sensor on?

72 & 73,
Bill
K9YEQ
FT'er for K2, KX1, KX3, KXPA100,  KAT500, W2, etc.

-----Original Message-----
From: [hidden email] <[hidden email]> On Behalf Of Chris Tate - N6WM
Sent: Friday, April 13, 2018 5:07 PM
To: [hidden email]
Subject: [Elecraft] W2 failure

I have a W2 wattmeter that seems to have failed.  its powers up (leds flash on for a moment) but then almost immediately shuts down.  any thoughts on what may be on the blink or something that I can look at?

Chris
N6WM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Michael Eberle]

Seems like I had a power connector issue with mine once. Using a
different power cable took care of it.
One of the sensor lights should be lit.  If no sensors are connected the
S1 and S2 lights will alternately flash.

Mike
KI0HA

On 4/13/2018 17:59, Chris Tate - N6WM wrote:

> Ya.. it doesn't even get that far..
>
> -----Original Message-----
> From: Bill Johnson <[hidden email]>
> Sent: Friday, April 13, 2018 3:13 PM
> To: Chris Tate - N6WM <[hidden email]>; [hidden email]
> Subject: RE: W2 failure
>
> Do you have the correct sensor on?
>
> 72 & 73,
> Bill
> K9YEQ
> FT'er for K2, KX1, KX3, KXPA100,  KAT500, W2, etc.
>
> -----Original Message-----
> From: [hidden email] <[hidden email]> On Behalf Of Chris Tate - N6WM
> Sent: Friday, April 13, 2018 5:07 PM
> To: [hidden email]
> Subject: [Elecraft] W2 failure
>
> I have a W2 wattmeter that seems to have failed.  its powers up (leds flash on for a moment) but then almost immediately shuts down.  any thoughts on what may be on the blink or something that I can look at?
>
> Chris
> N6WM
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]